SCA610-E28H1A-004 Murata, Accelerometer, 8-Pin SMD

  • RS-stocknr. 171-0673
  • Fabrikantnummer SCA610-E28H1A-004
  • Fabrikant Murata
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: FI
Productomschrijving

Accelerometer ICs, Murata

Murata's low-g acceleration sensors include high performance digital and analog accelerometers for both safety critical automotive and industrial applications. Based on 3D MEMS technology and intended for horizontal or vertical measurements. The sensing element and the measuring ASIC are assembled in a dual-in-line or dual-in-flat-line plastic package with pins for surface mount and re-flow soldering.

The zero point temperature dependence is less than 1mg/°C. Environmentally protected with silicone gel for high reliability in a humid environment and during temperature cycling. The sensing element design with over damped frequency response enables excellent performance even in harsh and vibrating environments.

The measuring direction is parallel or perpendicular to the mounting plane. The ASIC includes an on-chip EEPROM memory with the calibration coefficients for unit interchangeability.

Murata accelerometers include failure detection: digitally activated self-test, calibration memory parity or check sum check and continuous connection failure detection.

Accelerometers, Murata

Specificaties
Kenmerk Waarde
Sensor Type Accelerometer
Number of Axis 1
Technology Analogue
Mounting Type Surface Mount
Maximum Frequency Response 80Hz
Minimum Frequency Response 20Hz
Maximum Operating Supply Voltage 5.25 V
Minimum Operating Supply Voltage 4.75 V
Package Type SMD
Sensitivity 1.2V/g
Pin Count 8
Maximum Operating Temperature +125 °C
Minimum Operating Temperature -40 °C
44 op voorraad - levertijd is 2 werkdag(en).
Prijs Each (In a Bag of 4)
41,48
(excl. BTW)
50,19
(incl. BTW)
Aantal stuks
Per stuk
Per zak*
4 +
€ 41,48
€ 165,92
*prijsindicatie
Related Products
ST’s MEMS accelerometers include analogue and digital sensors ...
Description:
ST’s MEMS accelerometers include analogue and digital sensors featuring up to ±400g acceleration full scale and from 1.71 to 3.6 V supply voltage. Advanced power-saving features include ultra-low-power mode, auto wake-up function and FIFO buffer that can be used to ...
The STMicroelectronics accelerometer is an ultra-low Power high-performance ...
Description:
The STMicroelectronics accelerometer is an ultra-low Power high-performance system in a package featuring a 3D digital linear acceleration sensor and a 3D digital magnetic sensor. It has linear acceleration full scales of ±2g/±4g/±8g/±16g and a magnetic field dynamic range of ...
The TE Connectivity ACH-01 series are economic piezoelectric ...
Description:
The TE Connectivity ACH-01 series are economic piezoelectric accelerometers with outstanding performance characteristics. Designed for high volume applications requiring the permanent installation of an accelerometer, the ACH-01 series provide excellent phase response and wide frequency response. Suitable ...
MEMS accelerometers and iSensor MEMS accelerometer subsystems from ...
Description:
MEMS accelerometers and iSensor MEMS accelerometer subsystems from Analog Devices to accurately detect and measure acceleration, tilt, shock and vibration in performance-driven applications. Signal conditioning technology is integrated into every MEMS accelerometer, gyroscope, inertial measurement unit (IMU) from ...