- RS-stocknr.:
- 190-8448
- Fabrikantnummer:
- LIS3DHHTR
- Fabrikant:
- STMicroelectronics
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 16-12-2024, met een levertijd van 2 à 3 werkdagen.
Toegevoegd
Prijs Elk (op een haspel van 3000)
€ 8,539
(excl. BTW)
€ 10,332
(incl. BTW)
Aantal stuks | Per stuk | Per reel* |
3000 + | € 8,539 | € 25.617,00 |
*prijsindicatie |
- RS-stocknr.:
- 190-8448
- Fabrikantnummer:
- LIS3DHHTR
- Fabrikant:
- STMicroelectronics
Datasheets
Wetgeving en compliance
Productomschrijving
Features:
- 3-axis, ±2.5 g full-scale
- Ultra-low noise performance: 45 μg/√Hz
- Excellent stability over temperature (<0.4 mg/°C) and time
- 16-bit data output
- SPI 4-wire digital output interface
- Embedded temperature sensor
- 12-bit temperature data output
- Embedded FIFO (depth 32 levels)
- High shock survivability
- Extended operating temperature range (-40 °C to +85 °C)
- ECOPACK®, RoHS and Green compliant
- 3-axis, ±2.5 g full-scale
- Ultra-low noise performance: 45 μg/√Hz
- Excellent stability over temperature (<0.4 mg/°C) and time
- 16-bit data output
- SPI 4-wire digital output interface
- Embedded temperature sensor
- 12-bit temperature data output
- Embedded FIFO (depth 32 levels)
- High shock survivability
- Extended operating temperature range (-40 °C to +85 °C)
- ECOPACK®, RoHS and Green compliant
Description:
The LIS3DHH is an ultra-high-resolution and low noise three-axis linear accelerometer.
The LIS3DHH has a full scale of 2.5 g and is capable of providing the measured accelerations to the application through an SPI 4-wire digital interface.
The sensing element is manufactured using a dedicated micromachining process developed by STMicroelectronics to produce inertial sensors and actuators on silicon wafers.
The IC interface is manufactured using a CMOS process that allows a high level of integration to design a dedicated circuit which is trimmed to better match the characteristics of the sensing element.
The LIS3DHH is available in a high-performance (low-stress) ceramic cavity land grid array (CC LGA) package and can operate within a temperature range of -40 °C to +85 °C.
The LIS3DHH is an ultra-high-resolution and low noise three-axis linear accelerometer.
The LIS3DHH has a full scale of 2.5 g and is capable of providing the measured accelerations to the application through an SPI 4-wire digital interface.
The sensing element is manufactured using a dedicated micromachining process developed by STMicroelectronics to produce inertial sensors and actuators on silicon wafers.
The IC interface is manufactured using a CMOS process that allows a high level of integration to design a dedicated circuit which is trimmed to better match the characteristics of the sensing element.
The LIS3DHH is available in a high-performance (low-stress) ceramic cavity land grid array (CC LGA) package and can operate within a temperature range of -40 °C to +85 °C.
Specificaties
Kenmerk | Waarde |
---|---|
Sensor Type | Accelerometer |
Number of Axis | 3 |
Technology | Digital |
Mounting Type | Surface Mount |
Maximum Frequency Response | 440Hz |
Minimum Frequency Response | 235Hz |
Maximum Operating Supply Voltage | 3.6 V |
Minimum Operating Supply Voltage | 1.71 V |
Package Type | LGA |
Sensitivity | 0.076mg/digit |
Pin Count | 16 |
Maximum Operating Temperature | +85 °C |
Minimum Operating Temperature | -40 °C |