Araldite 2022-1, 50 ml Acrylic Adhesive

  • RS-stocknr. 124-9878
  • Fabrikantnummer 2022-1 50ml
  • Fabrikant Araldite
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

2022 - Toughened, Resilient Methacrylate for Thermoplastics

Resistance properties:-,Chemical - Excellent,Heat - Good,Water - Good,Impact - Excellent

Colour - Pale yellow
Versatile, excellent for a wide range of plastics, composites and metals
Excellent resistance to petrol and oils
Tolerant to less pre-treatment
Rapid cure
Gap filling up to 4mm thickness

Araldite Acrylic Adhesive

The Araldite white, yellow 50ml acrylic adhesive is a two-component room temperature curing general-purpose adhesive for rapid assembly operations with a wide variety of substrates. The product is made of methacrylate and is robust. It bonds to a wide range of plastics, composites and metals. It is a multi-purpose adhesive.

Features and Benefits

• Excellent resistance to gasoline and oils
• Gap filling to 0.157in
• Working time of 10 to 12 minutes
• One to one volume mix ratio
• High peel strength
• Suitable for service temperatures is up to 100°C (212°F)
• Very fast curing, good gap filling qualities
• Viscosity is 228,600cPs (A) and 45,200cPs (B)

Applications

• Adhesive dispensing equipment's
• Pretreated and dry joint surfaces

Certifications

• ANSI/ESD S20.20:2014
• BS EN 61340-5-1:2007

Specificaties
Kenmerk Waarde
Trade Name Araldite 2022-1
Application Multi-Purpose
Material Compatibility Metal, Plastic
Colour White, Yellow
Acrylic Type Methacrylate
Package Size 50 ml
Cure Time 6 (>1 Mpa) min, 10 (>10 Mpa) min
Viscosity Measurement 10 → 50 (2022-1 B) PaS, 15 → 50 (2022-1 A) PaS
Chemical Composition Methacrylate
21 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
23,60
(excl. BTW)
28,56
(incl. BTW)
Aantal stuks
Per stuk
1 - 5
€ 23,60
6 - 14
€ 22,66
15 +
€ 22,18
Related Products
A 2-part, fast setting (4-5 minutes), toughened acrylic ...
Description:
A 2-part, fast setting (4-5 minutes), toughened acrylic adhesive for high strength structural bonding applications. The adhesive Bonds well to Aluminium, metal, wood etc and provides a tough flexible bond line. Supplied in 50ml twin cartridge, it requires applicator gun, ...
Acrylic based clear hot melt adhesiveExceptional adhesion to ...
Description:
Acrylic based clear hot melt adhesiveExceptional adhesion to many difficult to bond materialsBonds to Metals, Concrete, Ceramics, Wood, Leather, Fabrics, Rubber and MelamineBonds achieved on plastics such as PVC, Polycarbonate, ABS, Polyester, Polystyrene and Acrylics.
This DP8405NS adhesive from 3M™ is a high-performing, ...
Description:
This DP8405NS adhesive from 3M™ is a high-performing, durable two-part acrylic adhesive which provides structural strength in minutes.The toughened adhesive offers improved adhesion to many metals and plastics, including slightly oily surfaces. Good shear and high peel strengthToughened adhesive proving ...
3M™ Scotch-Weld™ Low Odour Acrylic Adhesives are high ...
Description:
3M™ Scotch-Weld™ Low Odour Acrylic Adhesives are high performance, two-part acrylic adhesives with lower odour. ToughenedLow odourWork life of approximately 10 minutesGood shear strengthStructural strength in about 18 minutesHigh peel and impact strength10:1 mix ratioIncreased cure speed with applied heatFor ...