LCBSB-3-01A2-RT, 4.8mm High Nylon PCB Support for 4mm PCB Hole, 17.8 x 17.8mm Base

  • RS-stocknr. 721-4717
  • Fabrikantnummer LCBSB-3-01A2-RT
  • Fabrikant Richco
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Standard Adhesive Backed Supports

PCB supports moulded in nylon, with an adhesive covered base which is protected by a removable strip until fitting
The board to be supported is retained securely by the locking barb, but may be removed when required
The support can be permanently fixed to most smooth and clean surfaces, due to the good retention properties of the adhesive
As the supports require no fixing screws they are particularly useful where a tapped support pillar cannot be used, e.g. on the rear of front panels
Working temperature range: -20°C to +90°C
Colour is natural
PCB Thickness 1.6mm
Hole dia 4.0mm

Specificaties
Kenmerk Waarde
Overall Height 15mm
Body Height 4.8mm
Support Base Dimensions 17.8 x 17.8mm
PCB Hole Diameter 4mm
PCB Thickness 1.6mm
Material Nylon
Support Base Length 17.8mm
Support Base Width 17.8mm
3080 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
8280 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 40)
0,226
(excl. BTW)
0,273
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
40 - 360
€ 0,226
€ 9,04
400 - 760
€ 0,217
€ 8,68
800 - 1960
€ 0,21
€ 8,40
2000 +
€ 0,192
€ 7,68
*prijsindicatie
Related Products
FLCBS model: flexible spacers for printed circuit boards ...
Description:
FLCBS model: flexible spacers for printed circuit boards to facilitate access to the underside of the board for marking or maintenance.
A PCB support that is designed to fit ...
Description:
A PCB support that is designed to fit and lock into key slots on the chassisEasily installed or removed by hand Made from natural nylon 66 for high durabilityMinimal protrusion of 2.5mm on underside of chassisPCB/Chassis Thickness 1.6mmPCB hole diameter ...
FLCBS model: flexible spacers for printed circuit boards ...
Description:
FLCBS model: flexible spacers for printed circuit boards to facilitate access to the underside of the board for marking or maintenance.
Nylon PCB support pillars in various heights. This ...
Description:
Nylon PCB support pillars in various heights. This type snaps into place on both the chassis and the board and requires no fixing screws. Can be released by handMaterial: Nylon 66Colour: NaturalMinimal protrusion of support underneath PCB or chassisHole dia: ...