Schneider Electric U-Line Advanced Motor Starter

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: FR
Productomschrijving

Splitter Box

Using a Split Box enables up to 8 TeSys U starters to be connected a PLC module, although a maximum of 4 reversing are allowed per box
Requires a 24Vdc power source

Schneider Electric TeSys U

The TeSys U is a modular system for motor control; it enables the user to create a customised solution for their control requirements, from a series of standard modules. The plug-in modules allow the assembly and wiring before the selection of motor protection parameters and control voltages, they can be created or changed in seconds by changing the plug-in modules. A host of DOL starting applications can be catered for.

Faster design with fewer components needed
Quicker panel build with faster assembly time and fewer wires per starter
Space saving 45mm width up to 32A (even for reversing) allowing smaller panels
Flexible and upgradeable with plug-and-play function modules
Voltage and protection parameters can be determined after assembly and wiring
Broad band electronic control unit provides improved overload protection with fewer components
Expandable plug-and–play diagnostics
Total co-ordination for fast return to service after a short circuit fault

Tesys model U is easy to select:

First choose a Power Base- 12A or 32A, direct on line or reversing. The power base includes 2 auxiliary contacts.
Then choose the plug-in protection module by motor full load current and control voltage required.
Additional plug in functions can be selected and added at any time.
The plug-in bases can use any LU9 type blocks see stock no. 493-8779 for base option

Warning

  • Schneider are in the process of amending the colour of the TeSys range, from White to Black. This means that the stock you receive could be either of these colours. Please be assured that the colour change in no way affects the Fit, Form or Function of the product.
Specificaties
Kenmerk Waarde
Series U-Line
Component Type Modbus Hub
Range TeSys
4 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
119,26
(excl. BTW)
144,30
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 119,26
Related Products
Description:
This is one of the two basic units which is required everytime, together with a control unit. It is independent of the control voltage motor power and incorporates the breaking function. Breaking capacity of 50kA @400VacShort circuit protectionDisconnection/isolationTwo auxiliary contacts ...
These motor starters are available in a selection ...
Description:
These motor starters are available in a selection of formats. All have removable steel base plates for rigidity when mounting to an uneven surface and ease of earthing and wiring and an impact resistant polycarbonate front cover which is adaptable ...
The Altistart 48 soft start soft stop unit ...
Description:
The Altistart 48 soft start soft stop unit is a controller with 6 thyristors which is used for the torque controlled soft starting and stopping of three phase squirrel cage asynchronous motors. Exclusive Altistart torque control (patented by Schneider Electric)Constant ...
May be integrated into a motor control system ...
Description:
May be integrated into a motor control system using other Sirius control gear products, e.g. 3 pole circuit breakers from the 3RV10 range (see Control Gear section)Two phase control, plus soft starting and stopping of three phase asynchronous motorsLow power ...