MikroElektronika MIKROE-1396, Current Click Current Sensor Add On Board for mikroBUS

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CS
Productomschrijving

Current click mikroBUS™

The Click accessory modules plug into the mikroBUS™ sockets in MikroElektronika microcontroller development boards. Current Click is an accessory board that measures electric current and operates on a.3 V or 5 V power supply. The board features a current shunt monitor, 12-bit ADC, voltage reference and two screw terminals. The current shunt monitor converts the current into a voltage and the second screw terminal is for an external shunt. There are four shunts with different values letting you measure a range of current values. Communication with Current Click™ is via the mikroBUS™ SPI or AN lines. The Current click is ideal for current measurements in wide range applications.

Values range from 2 mA to 2048 mA (depending on the connected shunt)
mikroBUS Form factor
Supported in all MikroElektronika Compliers
Complete current sense solution
Supports bandwidth up to 500 kHz
Selectable AN or SPI communication interface
Four shunts provided in the package: 0.05 Ω, 0.2 Ω, 1 Ω and 10 Ω.
mikroBUS™ is a specially designed pinout standard with SPI, I2C, Analogue, UART, Interrupt, PWM, Reset and power supply pins

On Board: INA196 current shunt monitor/ MCP3201 12-bit Analogue to digital convertor/ MAX6106 voltage reference
Screw terminals

Note

Click board comes with the header strips soldered.

Specificaties
Kenmerk Waarde
Analogue Function Current Sensor
Kit Classification Add On Board
For Use With MikroBUS
Kit Name Current Click
4 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
20,54
(excl. BTW)
24,85
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 20,54
5 - 9
€ 19,31
10 +
€ 18,24
Related Products
The STEVAL-MIC001V1 daughterboard is designed to be used ...
Description:
The STEVAL-MIC001V1 daughterboard is designed to be used in conjunction with the X-NUCLEO-CCA02M1 expansion board, it is able to export the four additional PDMs for any user application requirement (NBW algorithm detection). 4 x MP34DT05-A top port digital MEMS microphonesDaughterboard ...
Silicone Lab’s Si1147 Module Evaluation Kit and come ...
Description:
Silicone Lab’s Si1147 Module Evaluation Kit and come with a Si114x Programmer’s Tool kit software. This enables the development kit straightforward access to the functions and features of the Si1145-M01, Si1146-M01 and Si1147-M01 optical sensors, while supporting the evaluation of ...
The EBM018 module measures ambient and reflected RGB ...
Description:
The EBM018 module measures ambient and reflected RGB light colour using an on-board TC53200D colour sensor and bright white light LED illuminators.Features & Benefits of the EBM018 Colour Sensor Module•Plastic housing to prevent contamination of the colour sensor•Flowcode free 30-day ...
The ADALM1000 module is an easy to use ...
Description:
The ADALM1000 module is an easy to use active learning tool that illustrates the relationships between current, voltage, impedance (resistance, inductance, and capacitance), introducing the fundamentals of electrical engineering. The ADALM1000 augments learning with a personal portable lab when used ...