Chauvin Arnoux C.A 5011 Analogue Multimeter 10A ac/dc 1000V ac/dc

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: FR
Productomschrijving

C.A 5011 Digital / Analogue Multimeter

The C.A 5011 multimeter gives the true RMS value (TRMS) whether the signal is sinusoidal or distorted. It features automatic AC / DC signal recognition.
Two additional readings: - digital for accuracy, backlit - analogue to assess measurement trends.
Shockproof case with a "Multistand" multi-purpose fold-away stand for use at worksites as well as in the lab.
Available in calibrated version.

Standards

IEC 61010-1, cat. III / 1000 V or cat. IV / 600 V

Specificaties
Kenmerk Waarde
Safety Category CAT III 1000 V
Maximum Current Measurement 10A ac/dc
Best AC Current Accuracy ±2.5 %
Best DC Current Accuracy ±2.5 %
Maximum Voltage Measurement 1000V ac/dc
Best AC Voltage Accuracy ±2.5 %
Best DC Voltage Accuracy ±2.5 %
Maximum Resistance Measurement 40 MΩ
Best Resistance Measurement Accuracy ±2.5 %
Continuity Check Yes
Battery Type 9V
Maximum Operating Temperature +55°C
Length 160mm
Safety Category Voltage 1000V
Safety Category Level CAT III
Weight 500g
Battery Life 300 h
Model Number p C.A 5011
Height 56mm
Minimum Operating Temperature -10°C
Dimensions 160 x 105 x 56mm
Width 105mm
6 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
470,00
(excl. BTW)
568,70
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 470,00
Related Products
The MX1 and MX2B are genuinely double-insulated up ...
Description:
The MX1 and MX2B are genuinely double-insulated up to 1500 V in line with safety standards (case insulation voltage above 8 kV). SECUR'X locking prevents the test leads from being disconnected accidentally. If the leads remain connected, it is impossible ...
RS PRO IDM19 pocket digital multimeter suitable for ...
Description:
RS PRO IDM19 pocket digital multimeter suitable for troubleshooting electrical and electronics problems and for measuring values like voltage, resistance and a tester for diode and continuity. This meter has an LCD display where the measurement readouts can be viewed. ...
IDM61 high-performance pocket multimeter with non-contact voltage detector. ...
Description:
IDM61 high-performance pocket multimeter with non-contact voltage detector. This meter is a handheld device which can measure capacitance, voltage, electrical current and resistance with diode and continuity check. This meter has an LCD display where the measurement readouts can be ...
Safety: CAT II 600 V. Compact milliohmmeter plus ...
Description:
Safety: CAT II 600 V. Compact milliohmmeter plus multimeter and thermometer for measuring low-impedance transitionsKelvin connection (four-conductor measurement)DATA hold memory for up to 1200 readingsFunctions: min, max, data hold.