Gossen Metrawatt METRAHit 2A Analogue Multimeter 15A 500V

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: CZ
Productomschrijving

Analogue Multimeter METRA HIT 1A/2A

Basic analogue multimeter with robust plastic casing
Broad scope of application thanks to a large number of measurement ranges
Battery for resistance measurement: 1x mignon cell AA 1.5 V

Additional features 2 A

Extended current measurement: up to 15 A AC / DC
Accuracy: Class 2.5

Optional accessories

Batteries: AA, pack of 10 (stock no.: 591-225)
Measuring cable set KS17-2 (stock no.: 292-1296)

Supplied with

Multimeter (excluding battery and cable set), instructions

Specificaties
Kenmerk Waarde
Safety Category CAT II 500 V
Maximum Current Measurement 15A
Maximum Voltage Measurement 500V
Best AC Voltage Accuracy ±2 %
Best DC Voltage Accuracy ±2 %
Maximum Resistance Measurement 1 MΩ
Battery Type AA
Model Number p METRAHit 2A
Maximum Operating Temperature +65°C
Dimensions 92 x 126 x 45mm
Safety Category Level CAT II
Height 45mm
Minimum Operating Temperature -25°C
Weight 300g
Width 126mm
Length 92mm
Safety Category Voltage 500V
Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 24-09-2019, met een levertijd van 1 werkdag.
Prijs Each
273,00
(excl. BTW)
330,33
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 273,00
Related Products
The MX1 and MX2B are genuinely double-insulated up ...
Description:
The MX1 and MX2B are genuinely double-insulated up to 1500 V in line with safety standards (case insulation voltage above 8 kV). SECUR'X locking prevents the test leads from being disconnected accidentally. If the leads remain connected, it is impossible ...
Measurement of voltage, current, resistance and level High ...
Description:
Measurement of voltage, current, resistance and level High input resistance 10 MΩ for load-free voltage measurementAutomatic battery cut-out when device is closedHinged lid for inclined scale position and transport protectionAccuracy class 1.5.
Particularly flat design (25 mm deep)Automatic/manual measurement range ...
Description:
Particularly flat design (25 mm deep)Automatic/manual measurement range selectionAcoustic overload warningHold/Min/Max as well as diode and continuity testingSwitchable input resistance for voltage measurementProtective case for rough working conditions.
The C.A 5011 multimeter gives the true RMS ...
Description:
The C.A 5011 multimeter gives the true RMS value (TRMS) whether the signal is sinusoidal or distorted. It features automatic AC / DC signal recognition.Two additional readings: - digital for accuracy, backlit - analogue to assess measurement trends.Shockproof case with ...