RS PRO Red Male Banana Plug - Solder Termination, 1kV, 10A

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

90° Shrouded Plugs

These 90° shrouded (also called sheathed) plugs from our own RS PRO brand are designed to avoid accidental contact in high voltage situations by having insulation around both the male and female connectors. They can be re-wired.

They benefit from polyamide moulded body and the centre pin which is nickel-plated brass. This is fitted with a multi laminated beryllium copper lantern style spring contact. High quality moulded parts are reliable for the most demanding test and measurements applications. Voltage rating of 1000V.

How to assemble these plugs?

• Strip back 6mm lead insulation
• Feed the securing nut over the lead
• Solder the nipple to the exposed wire
• Screw the securing nut into the plug body
• Push the solder nipple into the centre pin

Note: maximum cable diameter is 4.3mm

RS PRO

RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; they’re only given the RS PRO Seal of Approval if we’re confident of their exceptional quality, which means you can be confident too.

Specificaties
Kenmerk Waarde
Colour Red
Gender Male
Termination Method Solder
Voltage Rating 1kV
Current Rating 10A
Contact Plating Nickel
Spring Contact Yes
Contact Material Brass
Insulation Material Polyamide
230 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
770 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 5)
2,874
(excl. BTW)
3,478
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 45
€ 2,874
€ 14,37
50 - 120
€ 2,658
€ 13,29
125 - 245
€ 2,442
€ 12,21
250 +
€ 2,228
€ 11,14
*prijsindicatie
Related Products
From Hirschmann Test and Measurement, this LAS S ...
Description:
From Hirschmann Test and Measurement, this LAS S SW series safety plug is rated for CAT II applications. The banana plug is rigid and spring loaded, and is designed for tower construction. This safety connector is easy to assemble, and ...
BSB 300, Hirschmann CAT I, 4mm multi spring ...
Description:
BSB 300, Hirschmann CAT I, 4mm multi spring wire plug with 4mm parallel adapter, nickel plated brass construction with solder terminal with a maximum cable cross section of 1.5mm². Features and Benefits:• Rated at 16A 30V ac/60 V dc• CAT ...
Cinch Connectivity insulated solderless Tip Jack Series test ...
Description:
Cinch Connectivity insulated solderless Tip Jack Series test jacks have a nylon insulating body and nickel-plated brass contact. The Tip Jack series accept wire sizes to 16-gauge and has a recessed head to reduce shock hazard. Breakdown Voltage: 3500 VRMSCurrent: ...
Cinch Connectivity hex body insulated banana test plugs ...
Description:
Cinch Connectivity hex body insulated banana test plugs have a nylon insulating body and nickel-plated brass contact. The Tip Jack series accept wire sizes to 16-gauge and has a recessed head to reduce shock hazard. Breakdown Voltage: 3500 VRMSCurrent: 15 ...