Deltron Black Male Banana Plug - Solder, 50V

  • RS-stocknr. 180-6654
  • Fabrikantnummer 580-0100
  • Fabrikant Deltron
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

A standard in-line 4mm banana plug with a stainless steel contact spring.The large rear diameter of this plug will accept cables with a conductor of up 5,5mm (10 awg). The lead wire is held by soldering in a large solder bucket,The product is also supplied with a large diameter insulating cover that accepts cables with a maximum outside diameter of 7,1mm.Gold spec - GOLD 0.5 MICRONS Cu/Cu/Au0.5

Specificaties
Kenmerk Waarde
Colour Black
Gender Male
Termination Method Solder
Voltage Rating 50V
Current Rating 16A
Contact Plating Gold
Length 48.75mm
Type Standard Plug
Contact Material Brass
Insulation Material Acetal C 27021 R
19 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
3,19
(excl. BTW)
3,86
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 3,19
5 - 9
€ 2,99
10 - 24
€ 2,78
25 - 49
€ 2,58
50 +
€ 2,47
Related Products
Hirschmann Test and Measurement LAS 30 shatter proof ...
Description:
Hirschmann Test and Measurement LAS 30 shatter proof 4mm test plugs with caged spring and tapering sleeves provide protection against kinking, complete with a solder connection with a maximum conductor cross section of up to 1.5mm² and a maximum outer ...
Hirschmann test and measurement CAT I, 4mm series ...
Description:
Hirschmann test and measurement CAT I, 4mm series VQ 30 type test plugs, fully mating spring loaded connector, shatter-proof, with flexible insulated sleeve and 4mm diameter transverse hole. The tapering sleeve end also serves as strain relief and kinking protection ...
From Hirschmann Test and Measurement, this CAT I ...
Description:
From Hirschmann Test and Measurement, this CAT I 2 mm diameter unsprung miniature connector pin is for soldering into printed boards. The MST 201 type connector pin connects with MKU 1 and MBU 2 series of connectors. This 2mm connector ...
Cinch Connectivity insulated solderless Tip Jack Series test ...
Description:
Cinch Connectivity insulated solderless Tip Jack Series test jacks have a nylon insulating body and nickel-plated brass contact. The Tip Jack series accept wire sizes to 16-gauge and has a recessed head to reduce shock hazard. Breakdown Voltage: 3500 VRMSCurrent: ...