STMicroelectronics M4T28-BR12SH1, Lithium Battery Charger IC, 2.8 V 4-Pin, SNAPHAT

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

SNAPHAT® Lithium Coin Cell Battery with Crystal, STMicroelectronics

These Battery and Crystal Option devices are detachable lithium power sources housed in special top called SNAPHAT®. The SNAPHAT is snapped on the top of the surface-mounted IC in the Printed Circuit board. Also compatible with the non-volatile TIMEKEEPER® package by STMicroelectronics.

The STMicroelectronics M4T28-BR12SH1 is a battery and crystal within a detachable SNAPHAT package. The SNAPHAT package snaps onto the PCB, directly on top of an SMD SOIC package. This lithium power source is removable which avoids potential issues caused by the heat in surface mounting processes. The M4T28-BR12SH1 works with the ST range of serial real-time clock and non-volatile TIMEKEEPER® SOIC packages, in 28 or 44 pin variants.
The M4T28-BR12SH1 contains a BR1225 48mAh, 3V battery which can be used in temperatures from 0°C to +70°C.

• Lithium power source
• Snap-on package
• Keyed insertion for proper assembly
• Battery Capacity: 48mAh
• Non-rechargeable
• Pb-free package

Note

Recycle or dispose of batteries in accordance with the battery manufacturer's instructions and local/national disposal and recycling regulations.

Specificaties
Kenmerk Waarde
Battery Type Lithium-CF
Mounting Type Through Hole
Package Type SNAPHAT
Pin Count 4
Typical Operating Supply Voltage 2.8 V
Dimensions 21.84 x 14.99 x 7.75mm
Length 21.84mm
Width 14.99mm
Height 7.75mm
Maximum Operating Temperature +70 °C
Minimum Operating Temperature 0 °C
161 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
46 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Tube of 23)
4,075
(excl. BTW)
4,931
(incl. BTW)
Aantal stuks
Per stuk
Per tube*
23 - 23
€ 4,075
€ 93,725
46 - 69
€ 3,907
€ 89,861
92 - 207
€ 3,803
€ 87,469
230 - 437
€ 3,657
€ 84,111
460 +
€ 3,566
€ 82,018
*prijsindicatie
Related Products
This range of battery charger ICs from Analog ...
Description:
This range of battery charger ICs from Analog Devices includes switching, linear and monitoring types. Within this range, some products feature constant current or constant voltage linear charging, stacked lithium monitoring or battery isolation and USB-based battery management. Typical applications ...
ISL88739: Hybrid Power Boost (HPB) and Narrow VDC ...
Description:
ISL88739: Hybrid Power Boost (HPB) and Narrow VDC (NVDC) Combo Battery Charger with SMBus InterfaceISL88750: Narrow VDC (NVDC) Battery Charger with SMBus InterfaceISL9237: Buck-Boost Narrow VDC Battery Charger with SMBus Interface and USB On-the-Go (OTG)ISL9238: Buck-Boost Narrow VDC Battery Charger ...
Li-ion Battery Protection ICs detect a various fault ...
Description:
Li-ion Battery Protection ICs detect a various fault conditions such as overvoltage, undervoltage, discharge overcurrent, and short circuit. A standalone protection when no monitor is required, or supplemental safety.
Linear Technology presents a range of micropower monolithic ...
Description:
Linear Technology presents a range of micropower monolithic step-down buck converters these are intended for applications that need to increase efficiency at light loads. These devices produce low standby quiescent currents when in burst mode. They can be used in ...