STMicroelectronics, Battery Charge Controller IC, 48 V to 48 V Input 5.4 V Output 200 mA, TQFP 64-Pin
- RS-stocknr.:
- 219-4219P
- Fabrikantnummer:
- L9963E-TR
- Fabrikant:
- STMicroelectronics
Afbeelding representeert productcategorie
Bulkkorting beschikbaar
Subtotaal 5 eenheden (geleverd op een doorlopende strip)*
€ 49,00
(excl. BTW)
€ 59,30
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 04 mei 2027
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 5 - 9 | € 9,80 |
| 10 - 24 | € 8,82 |
| 25 - 49 | € 8,14 |
| 50 + | € 8,04 |
*prijsindicatie
- RS-stocknr.:
- 219-4219P
- Fabrikantnummer:
- L9963E-TR
- Fabrikant:
- STMicroelectronics
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | STMicroelectronics | |
| Sub Type | Battery Charge Controller IC | |
| Product Type | Battery Charge Controller IC | |
| Mount Type | Surface | |
| Package Type | TQFP | |
| Pin Count | 64 | |
| Minimum Supply Voltage | 48V | |
| Output Current | 200mA | |
| Maximum Supply Voltage | 48V | |
| Maximum Operating Temperature | 105°C | |
| Standards/Approvals | No | |
| Length | 10mm | |
| Series | L9963E | |
| Minimum Operating Temperature | -40°C | |
| Automotive Standard | AEC-Q100 | |
| Alles selecteren | ||
|---|---|---|
Merk STMicroelectronics | ||
Sub Type Battery Charge Controller IC | ||
Product Type Battery Charge Controller IC | ||
Mount Type Surface | ||
Package Type TQFP | ||
Pin Count 64 | ||
Minimum Supply Voltage 48V | ||
Output Current 200mA | ||
Maximum Supply Voltage 48V | ||
Maximum Operating Temperature 105°C | ||
Standards/Approvals No | ||
Length 10mm | ||
Series L9963E | ||
Minimum Operating Temperature -40°C | ||
Automotive Standard AEC-Q100 | ||
The STMicroelectronics L9963E is a Li-ion battery monitoring and protecting chip for high-reliability automotive applications and energy storage systems. Up to 14 stacked battery cells can be monitored to meet the requirements of 48 V and higher voltage systems. Each cell voltage is measured with high accuracy, as well as the current for the on-chip coulomb counting. The device can monitor up to 7 NTCs. The information is transmitted through SPI communication or isolated interface.
AEC-Q100 qualified
Measures 4 to 14 cells in series, with 0 μs desynchronization delay between samples. Supports also Busbar connection without altering cell results
Coulomb counter supporting pack overcurrent detection in both ignition on and off states. Fully synchronized current and voltage samples