- RS-stocknr.:
- 124-8452
- Fabrikantnummer:
- TMMR 200F
- Fabrikant:
- SKF
3 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
4 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
Toegevoegd
Prijs Per stuk
€ 203,34
(excl. BTW)
€ 246,04
(incl. BTW)
Aantal stuks | Per stuk |
1 + | € 203,34 |
- RS-stocknr.:
- 124-8452
- Fabrikantnummer:
- TMMR 200F
- Fabrikant:
- SKF
Datasheets
Wetgeving en compliance
- Land van herkomst:
- SI
Productomschrijving
SKF Bearing Puller, 2 Jaws, Hand-Operated - TMMR 200F
Need to get a bearing, gear or pulley off a shaft without a tussle? With this hand-operated bearing puller from SKF, it'll slide right off. The arms can be mounted to suit either internal or external pulling, and they're self-locking for easy adjustment of the grip width. Along with the jaw reach of 169mm, this makes it a versatile tool for all your pulling needs. The spindle-tip cone rotates to enhance stability and reduce the risk of the shaft being damaged while you work.
Features & Benefits
Zinc-passivated arms resist corrosion and make cleaning a breeze
Hex head on the spindle is fitted with a flange to keep your spanner from slipping
Hex head on the spindle is fitted with a flange to keep your spanner from slipping
Applications
Automotive workshops
Factory floors
Machine building
Factory floors
Machine building
How do I use a hand-operated bearing puller?
Place the puller around or inside the part. Adjust the bearing puller legs to achieve a tight fight. Turn the forcing screw clockwise until it touches the shaft. Then, turn the forcing screw slowly and carefully to remove your part. Used in this way, a hand-operated bearing puller makes it easy to remove even damaged, worn or stuck bearings.
Specificaties
Kenmerk | Waarde |
---|---|
Capacity | 204.0 mm |
Puller Type | Bearing Puller |
Operation | Hand |