Bulkkorting beschikbaar
Subtotaal (1 eenheid)*
€ 4,95
(excl. BTW)
€ 5,99
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 75,00
Op voorraad
- 55 stuk(s) klaar voor verzending
- 46 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 4,95 |
| 5 - 9 | € 4,75 |
| 10 - 24 | € 4,66 |
| 25 + | € 4,57 |
*prijsindicatie
- RS-stocknr.:
- 311-2780
- Fabrikantnummer:
- GFL-20
- Fabrikant:
- Igus
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Igus | |
| Inside Diameter | 20mm | |
| Bearing Unit Type | Flange Bearing Unit | |
| Number of Mount Holes | 2 | |
| Material | Iglide G300 | |
| Length | 60mm | |
| Width | 30mm | |
| Depth | 10mm | |
| Mount Hole Size | 6.5mm | |
| Mount Hole Centre-to-Centre | 44mm | |
| Alles selecteren | ||
|---|---|---|
Merk Igus | ||
Inside Diameter 20mm | ||
Bearing Unit Type Flange Bearing Unit | ||
Number of Mount Holes 2 | ||
Material Iglide G300 | ||
Length 60mm | ||
Width 30mm | ||
Depth 10mm | ||
Mount Hole Size 6.5mm | ||
Mount Hole Centre-to-Centre 44mm | ||
Vrijgesteld
- Land van herkomst:
- DE
IGUS® Maintenance Free 2 Bolt Plain Bearing
These very low height plain bearings can be used with rotating, oscillating and axial movements. They are maintenance free and abrasion, temperature and corrosion resistant.
E10 tolerance on inside diameter (measured with plug gauge)
Fit into a H7 bore for high load applications
Can be used with a simple punched hole for most applications
Temperatures from -40°C to +220°C (short term), 130°C (long term) possible
Maintenance free, self lubricating
Ideal in dirty dusty conditions
Fit into a H7 bore for high load applications
Can be used with a simple punched hole for most applications
Temperatures from -40°C to +220°C (short term), 130°C (long term) possible
Maintenance free, self lubricating
Ideal in dirty dusty conditions
Note
IGUBAL® bearings are designed to run with a clearance between the shaft and the inside diameter of the ball, to prevent the ball turning in the housing.
Flange Units & Pedestal / Pillow Blocks
IGUBAL® pillow block bearings are self-lubricating and require no maintenance. Designed to run dry major advantages include the bearings are extremely tolerant to dirt and dust, meaning that IGUBAL® can be used in abrasive environments.
Low weight (20% of equivalent steel)
High rigidity
Maintenance free-dry running
Corrosion and chemically resistant
High fatigue strength under changing loads
Working temperature range: -30 to +80°C
High rigidity
Maintenance free-dry running
Corrosion and chemically resistant
High fatigue strength under changing loads
Working temperature range: -30 to +80°C