Bulkkorting beschikbaar
Subtotaal (1 eenheid)*
€ 61,73
(excl. BTW)
€ 74,69
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 75,00
Op voorraad
- Plus verzending 1 stuk(s) vanaf 16 februari 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 61,73 |
| 5 - 9 | € 59,27 |
| 10 - 24 | € 58,03 |
| 25 + | € 56,78 |
*prijsindicatie
- RS-stocknr.:
- 339-8805
- Fabrikantnummer:
- PFT 25 TF
- Fabrikant:
- SKF
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SKF | |
| Product Type | Bearing Unit | |
| Inside Diameter | 25 mm | |
| Material | Pressed Steel | |
| Length | 71mm | |
| Width | 34.1 mm | |
| Standards/Approvals | No | |
| Static Load Rating | 7.8kN | |
| Limiting Speed | 7000rpm | |
| Dynamic Load Rating | 14kN | |
| Alles selecteren | ||
|---|---|---|
Merk SKF | ||
Product Type Bearing Unit | ||
Inside Diameter 25 mm | ||
Material Pressed Steel | ||
Length 71mm | ||
Width 34.1 mm | ||
Standards/Approvals No | ||
Static Load Rating 7.8kN | ||
Limiting Speed 7000rpm | ||
Dynamic Load Rating 14kN | ||
Vrijgesteld
- Land van herkomst:
- IT
SKF Bearing Unit, Flanged Housing, Pressed Steel Material, 25mm Bore Diameter - PFT 25 TF
Use this flanged bearing unit from SKF to securely mount your bearing to a machine. It has pre-drilled holes to accommodate 8mm attachment bolts, making it simple to install. Thanks to its integrated seals and flingers, the housing is protected against contaminants, oil and moisture, so it's suitable for use in harsh environments. Overall dimensions of 71 (L) x 34.1 (W) x 95mm (H) mean this unit will add limited bulk to your setup.
• Pressed steel housing is resistant to corrosion and impact for use in demanding environments
• Dynamic load rating of 14kN and static load rating of 7.8kN to support heavy-duty loads
• Light weight of 300g to place minimal strain on your equipment
• Bore diameter of 25mm for use with small shafts
Applications
• Food processing machinery
• Conveyors
• Textile equipment
• Material handling applications
Can I use this bearing unit for high-speed applications?
Yes, this bearing unit has a limiting speed of 7,000rpm, making it a good choice for use in applications involving high rotational speeds.