Bulkkorting beschikbaar
Subtotaal (1 eenheid)*
€ 17,79
(excl. BTW)
€ 21,53
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 75,00
Op voorraad
- Plus verzending 16 stuk(s) vanaf 16 februari 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 17,79 |
| 5 - 9 | € 17,43 |
| 10 + | € 17,06 |
*prijsindicatie
- RS-stocknr.:
- 750-9071
- Fabrikantnummer:
- UCT205
- Fabrikant:
- RS PRO
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | RS PRO | |
| Product Type | Bearing Unit | |
| Inside Diameter | 25 mm | |
| Locking Type | Set Screw | |
| Housing Material | Cast Iron | |
| Length | 97mm | |
| Width | 89 mm | |
| Depth | 34mm | |
| Standards/Approvals | No | |
| Series | UCT | |
| Limiting Speed | 5850rpm | |
| Static Load Rating | 7.8kN | |
| Bearing Type | Ball | |
| Alles selecteren | ||
|---|---|---|
Merk RS PRO | ||
Product Type Bearing Unit | ||
Inside Diameter 25 mm | ||
Locking Type Set Screw | ||
Housing Material Cast Iron | ||
Length 97mm | ||
Width 89 mm | ||
Depth 34mm | ||
Standards/Approvals No | ||
Series UCT | ||
Limiting Speed 5850rpm | ||
Static Load Rating 7.8kN | ||
Bearing Type Ball | ||
Vrijgesteld
Bearing Take-Up Units, Normal Duty - RS
Take-up units are often used to “take up” any slackness in conveyor belt systems. A nut is inserted into the slot in the body of the unit, and with a bolt threaded into the nut, drive belt tension can be adjusted accordingly.
RS take-up unit bodies are manufactured from cast iron, with metric bearings.
Bearing Take-Up Units
Take-up units are often used where shaft or belt adjustment/tightening is required, and are often seen installed within conveyor systems. The units may also be installed within food processing environments and used for agricultural equipment applications.
Supplied with
grease nipples