Microchip 2 RS232 Bluetooth Adapter

  • RS-stocknr. 769-4154
  • Fabrikantnummer RN-270F
  • Fabrikant Microchip
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

RN-270F Bluetooth Adapter

The Microchip RN-270F is smaller than a business card that easily attaches to RS232 serial ports via a DB9 female connector. It gives any RS232 serial port Bluetooth capabilities and can run without external power. With a built-in AAA battery holders and an advanced sleep modes gives it an incredibly long-life operation (10-20hrs).

Battery powered RS232 serial adapter eliminates messy cable clutter with Bluetooth link
Compatible with all Roving Networks' serial adapters and Bluetooth modules and other devices supporting SPP
Auto pairing and auto connect feature when communicating with other Roving devices
Conveniently located DIP switches for baud rate selection and auto pair/connect modes
Class 1 Bluetooth device with integrated antenna supporting Bluetooth 2.1+EDR
Onboard DTE/DCE jumpers eliminates the need for crossover cables
Battery powered (alkaline or rechargeable) with built-in recharging circuit
Settings can be easily changed with AT commands via serial port and remotely over Bluetooth
Status LED’s for TX/RX data, power/connection status and configuration mode
Advanced Trigger mode connects/disconnects upon sensing incoming data RN-270F (female)

Note

With an alternative male connector: 7694163

Bluetooth - Microchip

Specificaties
Kenmerk Waarde
Class Class 2
Interface RS232
Type Bluetooth
2 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
10 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
91,63
(excl. BTW)
110,87
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 91,63
10 - 24
€ 78,17
25 - 99
€ 73,89
100 +
€ 72,33
Related Products
This small Bluetooth dongle is a great addition ...
Description:
This small Bluetooth dongle is a great addition to any SBC (Single Board Computer). Included with this smart Bluetooth dongle is a free development kit that provides you great information on how to produce your own LE applications through a ...
9-25 way adaptors in various configurations to meet ...
Description:
9-25 way adaptors in various configurations to meet your requirements. These fully moulded adaptors can be used to match up peripheral units with different connector sizes quickly and easily. Durability of 100 mating cycles. 300V operating voltage. Screw posts (SP) ...
Converter to connect serial devices to a USB ...
Description:
Converter to connect serial devices to a USB port on your PCMode: Asynchronous serial communicationCompatible with USB 2.0, USB 1.1, USB 1.0Isolation 3000 VDC (optical)Connectors: 5-pin terminal block, 1x Mini USB type BData transfer rate of up to 115 Kbit/sTerminal ...
This converter changes a USB port into an ...
Description:
This converter changes a USB port into an RS-232 serial communications port with 4 x DB9 Male connectors. Features and Benefits·Allows connection to a modem, PDA, GPS, measurement tools, industrial machinery and more·Stable chipset PL2303·Compatible with USB3.0/USB2.0/USB1.1 interfaces·USB A Male ...