Vishay Bridge Rectifier, 4A, 600V, 4-Pin
- RS-stocknr.:
- 700-5484
- Fabrikantnummer:
- KBU4J-E4/51
- Fabrikant:
- Vishay
Bulkkorting beschikbaar
Subtotaal (1 verpakking van 5 eenheden)*
€ 18,91
(excl. BTW)
€ 22,88
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 75,00
Tijdelijk niet op voorraad
- Verzending 2.280 stuk(s) vanaf 19 januari 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Per verpakking* |
|---|---|---|
| 5 - 45 | € 3,782 | € 18,91 |
| 50 - 120 | € 3,328 | € 16,64 |
| 125 - 245 | € 3,10 | € 15,50 |
| 250 - 495 | € 2,876 | € 14,38 |
| 500 + | € 2,724 | € 13,62 |
*prijsindicatie
- RS-stocknr.:
- 700-5484
- Fabrikantnummer:
- KBU4J-E4/51
- Fabrikant:
- Vishay
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Vishay | |
| Peak Average Forward Current | 4A | |
| Bridge Type | Single Phase | |
| Peak Reverse Repetitive Voltage | 600V | |
| Mounting Type | Through Hole | |
| Package Type | KBU | |
| Pin Count | 4 | |
| Configuration | Single | |
| Peak Non-Repetitive Forward Surge Current | 200A | |
| Maximum Operating Temperature | +150 °C | |
| Minimum Operating Temperature | -50 °C | |
| Peak Forward Voltage | 1V | |
| Peak Reverse Current | 5µA | |
| Length | 23.7mm | |
| Dimensions | 23.7 x 7.1 x 19.3mm | |
| Width | 7.1mm | |
| Height | 19.3mm | |
| Alles selecteren | ||
|---|---|---|
Merk Vishay | ||
Peak Average Forward Current 4A | ||
Bridge Type Single Phase | ||
Peak Reverse Repetitive Voltage 600V | ||
Mounting Type Through Hole | ||
Package Type KBU | ||
Pin Count 4 | ||
Configuration Single | ||
Peak Non-Repetitive Forward Surge Current 200A | ||
Maximum Operating Temperature +150 °C | ||
Minimum Operating Temperature -50 °C | ||
Peak Forward Voltage 1V | ||
Peak Reverse Current 5µA | ||
Length 23.7mm | ||
Dimensions 23.7 x 7.1 x 19.3mm | ||
Width 7.1mm | ||
Height 19.3mm | ||
SIL PCB Mounting, KBU Series, Vishay Semiconductor
KBU4x, KBU6x and KBU8x series bridge rectifiers in SIL PCB Mounting package from Vishay Semiconductor
Soldering pins for Printed Circuit Board (PCB) through-hole mounting
High surge current capability
Isolating voltage 1500Vrms
Package centre hole for fixing
Bridge Rectifiers - Vishay Semiconductor
The Bridge Rectifier converts an Alternating Current (AC) input into a Direct Current (DC) output for full-wave rectification applications. The diode arrangement provides the same polarity of output for either polarity of input. A three-phase full-wave rectifier is an arrangement of six diodes in a bridge circuit configuration. The packages are designed for minimal size, highest reliability and maximum thermal performance.
Approvals
UL E54214