Nickel Aluminium Bronze Rod, 18in x 2in OD

Wetgeving en compliance
Land van herkomst: GB

Nickel Aluminium Bronze

The RS Pro range of Nickel Aluminium Bronze rod and tubes, offer a high level of Aluminium and Nickel making it a high strength option, while keeping the core Bronze properties of high wear, corrosion and ductility. Typical applications include gears, bearings, pumps, impellers, turbine components and masonry fixings.

Features and Benefits

Corrosion resistance Good strength and ductility
High weldability

Specification DGS1043 grade 2 Issue 4 BS EN10204 1981 3.1B
Related specifications - cast and wrought:

ISO: CU A 110 FE 5N15.CA104
British: BS1400:A.B.2


DGS 1043 grade 2 Issue 4; BS EN10204 1981 3.1B; CU A 110 FE5N15.CA104 (ISO); BS1400:A.B.2 (British)

Kenmerk Waarde
Material Nickel Aluminium Bronze
Form Rod
Length 18in
Outer Diameter 2in
Thermal Conductivity 37.7W/mK
Tensile Strength 680 → 40 m
Height 2in
Density 7.58g/cm³
Hardness 120 to 220 HV
Suitability Bearings, Bushings, Heavy Load Gears, Hydraulic Valve Components, Pumps, Valves, Wear Plates, Worm Wheels
Width 2in
2 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
(excl. BTW)
(incl. BTW)
Aantal stuks
Per stuk
1 - 2
€ 285,37
3 - 5
€ 265,40
6 - 11
€ 251,12
12 +
€ 228,30
Related Products
The RS Pro range of Bronze rod and ...
The RS Pro range of Bronze rod and tubes, offer great machining qualities and a high degree of resistance to corrosion. Suitable for different types of applications. To BS1400: 1985: PBI ConcastProduced to nominal size + 1/32 in. plus toleranceHigh ...
A general purpose free-machining lead bronze. Although lower ...
A general purpose free-machining lead bronze. Although lower in tensile strength than phosphor bronze, it possesses good bearing properties with the ability to conform to minor shaft misalignments. The presence of lead reduces friction, running temperature and the possibility of ...
Providing high strength with a low level of ...
Providing high strength with a low level of creep and good wear resistance up to 300°C in continuous use. Suitable for thermally and mechanically stressed engineering elements and components. Dimensional stabilityElectrical insulationHigh purityLow outgassingInherently flame retardantGood radiationEasily machined ...