HellermannTyton

  • RS-stocknr. 123-7490
  • Fabrikantnummer 435-00806 Gel-100 Mixing-Nozzle-KH100-CL/OG (10)
  • Fabrikant HellermannTyton
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

HellermannTyton Two Component Gel-100 RELICON

The RELICON 100 is suitable for use with junction boxes in low voltage ranges. The junction boxes can be located in humid areas or in the ground.These cartridges can be used with a standard cartridge applicator gun.

Features and Benefits

Transparent
Removable
Saltwater resistant
Excellent flow properties
Soft elastic, vibration absorbing
Excellent insulating properties
Cures without developing heat
Non toxic
Silicone and isocyanate free
SVHC free
No hazardous substances
Can be disposed of with household waste once cured
Halogen Free

Note

Mixing nozzle can be purchased separately see RS Part Number 123-7490

Supplied with

Cartridge and mixing nozzle

Strain Relief Two Component Silicone Religel

Specificaties
Kenmerk Waarde
Application Electrical Insulation and Moisture Protection for The Low-Voltage Networks, Particularly Suitable for Filling of Cable Junction Boxes
Fire Behaviour Halogen Free
Series Relicon
Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 11-06-2020, met een levertijd van 1 werkdag.
Prijs Each
23,08
(excl. BTW)
27,93
(incl. BTW)
Aantal stuks
Per stuk
1 - 14
€ 23,08
15 - 49
€ 21,91
50 +
€ 21,24
Related Products
Heat shrink straight joint connectors are designed for ...
Description:
Heat shrink straight joint connectors are designed for installations in low voltage electrical networks. PVC, XLPE, PE, EPR utility and polymeric cables and wires can use this suitable application for jointing. Applications can be included underground, submerged, outdoor, indoor and ...
Heat shrink straight joint connectors are designed for ...
Description:
Heat shrink straight joint connectors are designed for installations in low voltage electrical networks. PVC, XLPE, PE, EPR utility and polymeric cables and wires can use this suitable application for jointing. Applications can be included underground, submerged, outdoor, indoor and ...
The Raytech Magic Joint is a cable joint ...
Description:
The Raytech Magic Joint is a cable joint suitable for extruded 0.6/1 kV cables. It is easy to install and is formed by two plastic half shells that, once closed on the cable after conductor connection, are then filled with ...
The Raytech CLIK -FIRE is a fast, ready ...
Description:
The Raytech CLIK -FIRE is a fast, ready to use joint for 0.6/1 kV extruded cables. Formed by a robust case which is pre-filled with a suitable gel, which snaps closed to provide fast and easy installation. Available in 2 ...