Raytech Unshielded Straight Gel Filled Cable Jointing Kit 4 x 2.5 → 25mm²

  • RS-stocknr. 713-3823
  • Fabrikantnummer Magic Joint 25
  • Fabrikant Raytech
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: IT
Productomschrijving

Magic Joint Cable Jointing Kit

The Raytech Magic Joint is a cable joint suitable for extruded 0.6/1 kV cables. It is easy to install and is formed by two plastic half shells that, once closed on the cable after conductor connection, are then filled with the magic fluid. This cable jointing kit is ideal for installations in ducts or traps underground, submerged or directly exposed to the weather. Magic joint has no shelf life, is safe, non toxic and re-enterable even after long working periods. Fast in cross linking without any increase of temperature, the insulation has high dielectric characteristics

No shelf life
Completely non toxic
Cure time less than 10 minutes at room temperature
Joints are re-enterable even after log working periods
Degree of protection higher than IP68
Can be installed under water at any depth
Can be used safely in unventilated and confined areas

Note

Splices/ Connectors should be ordered separately to suit the cable type or application

Approvals

CEI EN 50393; CEI 20-33
Class 2 in accordance with CEI 64-8
Degree of protection higher than IP68 in accordance with IEC 529

Supplied with

1 x closure with phase separator, 1 x cable tie, sealing tape, bag of Magic Fluid, instructions.

Supplied with

1 x closure with phase separator, 1 x cable tie, sealing tape, bag of Magic Fluid, instructions

Specificaties
Kenmerk Waarde
Application Unshielded
Number of Cores 4
Dimensions 215 x 55mm
Kit Includes Cable Ties, Enclosure with Phase Separator, Instructions, Polymeric Resin, Sealing Tape
Cable Size 4 x 2.5 → 25mm²
Material Gel Filled
Joint Type Straight
9 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
29,81
(excl. BTW)
36,07
(incl. BTW)
Aantal stuks
Per stuk
1 - 14
€ 29,81
15 - 49
€ 28,34
50 +
€ 26,82
Related Products
Bicast® inline steel wire armoured cable joints cover ...
Description:
Bicast® inline steel wire armoured cable joints cover a range of cables from 2 core 1.5mm² to 4 core 120mm² SWA, and can also be used on other types of cable.,The kits conform to BS691. Features a lightweight, easy flow, ...
This TE Connectivity GelWrap splice closure insulates and ...
Description:
This TE Connectivity GelWrap splice closure insulates and seals buried electrical connections rated up to 1000 volts. The robust, compact design of the GelWrap splice closure is engineered to handle the harsh environments of direct burial and manhole applications. GelWrap ...
The RayGel Plus PowerGel cable joints are designed ...
Description:
The RayGel Plus PowerGel cable joints are designed for single and multi-core polymeric cables 0.6/1kV, covering and sealing the joint quickly and easily. Easy installationHumidity and water protectionIdeal for outdoor and direct buried applications (IP68)Full branch capabilitiesJoint design optimized with ...
Specially designed for environmental sealing and electrical insulation ...
Description:
Specially designed for environmental sealing and electrical insulation of wire splices, terminations and componentsFlame retardant, mechanically toughExcellent strain reliefThick adhesive liner, barrier against fluidsOperating temp -40°C to 125°CMin shrink temp 135°C.