3M Adhesive Cable Marking Kit ScotchCode™, 10 Markers

  • RS-stocknr. 308-092
  • Fabrikantnummer 89576
  • Fabrikant 3M
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: US
Productomschrijving

3M Adhesive Cable Marking Kit and Refill Tape

With 10 refillable compartments the ScotchCode Tape Dispenser is not only compact but also portable, able to hold 8ft rolls it features an end loop hook for tool pouches or belts. Providing fast, convenient and easy to cut dispensing with little waste, an ideal solution to electrical and automotive label needs.

RS Article 308-092 dispenser is already filled with 10 rolls of standard numbered tape, marked 0-9 in black on white, the tape is non-smear polyester. For marking binder groups, cable or wire, designed to be 'high tack' acrylic. The tape is resistant to solvents, oils and water adhering firmly to insulation surfaces. Smooth surfaced tape allows you to easily wipe off dirt and grime, and is durable for industrial electrical application.

Tape roll refills available:

296-337 (digit 0)
734-8848 (digit 1)
296-309 (digit 2)
296-438 (digit 3)
296-422 (digit 4)
296-236 (digit 5)
296-365 (digit 6)
395-119 (digit 7)
296-343 (digit 8)
296-321 (digit 9)

Features and Benefits:

Dispenser
• 10 refillable compartments
• Loop hook ended
• Contamination protection for tapes
• Dispenses desired length
Tape rolls
• Durable with aggressive adhesive
• Wipe clean
• 0°C to 49°C application temperature
• -40°C to 121°C operating temperature
• 5.46mm width, 2.4m length, 0.08mm thickness

Frequently asked questions:

How do you use cable markers?
Specifically designed for identifying cables, cable markers are essential in conduit and bundles. They not only assist engineers and technicians with identifying wires or cables, but they also assist with health, safety and effective maintenance.

How you use a cable marker can vary, as their method of application can differ. Adhesive and self-laminating are generally used for terminated wires, they wrap around the wire with a clear protective layer. Clip and slide on labelling are generally colour coded or pre-printed with letters, numbers and symbols. The single characters can also be combined to create a legend. Some are straight, some are chevron shaped. Whilst slide on markers need to be applied pre-termination, clip-on can be applied after termination. Heat shrink, shrunk to fit the cable are flexible, durable and do not fall off. Tie on tags or markers can generally be used on larger bundles.
RS offers a large range of cable ties, markers, labels and kits.

Contents

1 full dispenser + 10 spare tapes: 0 → 9

Specificaties
Kenmerk Waarde
Affixing Method Adhesive
Kit or Accessory Type Tape Dispenser
Quantity 10
Kit Includes Filled Dispenser
Material Polyester
Series ScotchCode™
21 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
63,05
(excl. BTW)
76,29
(incl. BTW)
Aantal stuks
Per stuk
1 - 14
€ 63,05
15 - 49
€ 59,88
50 +
€ 56,74
Related Products
Heat shrink straight joint connectors are designed for ...
Description:
Heat shrink straight joint connectors are designed for installations in low voltage electrical networks. PVC, XLPE, PE, EPR utility and polymeric cables and wires can use this suitable application for jointing. Applications can be included underground, submerged, outdoor, indoor and ...
LV Cable Joints are designed to be used ...
Description:
LV Cable Joints are designed to be used with multicore armoured polymeric low voltage energy cables. Designed for indoor and outdoor use and also for underground and submerged applications. Resin 470W contained in two chamber bags for mixingTransparent mixing bagsTwo ...
The RayGel Plus PowerGel cable joints are designed ...
Description:
The RayGel Plus PowerGel cable joints are designed for single and multi-core polymeric cables 0.6/1kV, covering and sealing the joint quickly and easily. Easy installationHumidity and water protectionIdeal for outdoor and direct buried applications (IP68)Full branch capabilitiesJoint design optimized with ...
Specially designed for environmental sealing and electrical insulation ...
Description:
Specially designed for environmental sealing and electrical insulation of wire splices, terminations and componentsFlame retardant, mechanically toughExcellent strain reliefThick adhesive liner, barrier against fluidsOperating temp -40°C to 125°CMin shrink temp 135°C.