Zircon Z62616 Metal Detector, LED Display

  • RS-stocknr. 123-1025
  • Fabrikantnummer Z62616
  • Fabrikant Zircon
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Zircon MetalliScanner m40

The m40 Metalliscanner from Zircon is designed to easily detect metal in wood, drywall, panelling, tiling, plaster, concrete and other non-metallic surfaces.

The m40 solves the difficult problem of finding metal studs in lath and plastered walls. It works by finding the pattern of nails that attach the wooden lath to the studs.

Featuring two scanning positions, each with a progressive LED display. When the Metal Detector approaches a metallic object, red LEDs progressively light from the bottom up. Once the metal target is located the top lighted blue coil and audio tone are activated.

It locates ferrous (magnetic) metal up to 4 in (102 mm) deep and non-ferrous (non-magnetic) metal up to 2 in (51 mm) deep.

Features and Benefits:

Pinpoint Scan to locate small metal objects such as screws and nails
Wide Scan to detect metal in walls or concrete
LED arrays indicate signal strength

Specificaties
Kenmerk Waarde
Metal Detection Depth 51 (Non-Magnetic) mm, 102 (Magnetic) mm
Display Type LED
Battery Type 9V Alkaline
Power Source Battery
Dimensions 191 x 140 x 28mm
Weight 111 (Without Battery)g
Height 28mm
Length 191mm
Maximum Operating Temperature +49°C
Minimum Operating Temperature +4°C
Width 140mm
Model Number p Z62616
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
Related Products
The Exitpoint XL300 from Zircon is designed to ...
Description:
The Exitpoint XL300 from Zircon is designed to accurately detect exit points before drilling and coring. The XL300 is the easiest way to locate a precise spot without the need of measuring before starting work on your project.It scans through ...
The MetalliScanner™ MT 7 electronic metal locator is ...
Description:
The MetalliScanner™ MT 7 electronic metal locator is designed for finding metal in standard residential, commercial, and industrial construction. The bright, backlit display indicates the metal target depth (in both inches and centimeters) up to 15 cm deep, the type ...
The Bosch wall/floor scanner is ultra-wideband (UWB) radar ...
Description:
The Bosch wall/floor scanner is ultra-wideband (UWB) radar technology that delivers a higher range of detection, and this scanner has multimode detection capability. It is an ideal tool for construction workers, electricians, carpenters, plumbers, and others who need reliable detection. ...
Multi metal detector, including deep lying objects up ...
Description:
Multi metal detector, including deep lying objects up to a depth of 120mm. Extremely reliable, all objects are found and application errors are avoided due to the automatic calibration. Three detection modes for different applications: drywall mode, metal mode and ...