TE Connectivity Straight Cable Boot Black, LFH Polyolefin, 30mm

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Zero Halogen (Lipped) - 202K1 and 222K1 Series

Designed for use where hazard reduction in the event of fire is crucial. Widely used in marine, transport, offshore and other high specification applications. Other features include low smoke index as defined by NES711, low toxicity index as defined by NES713 and high temperature index as defined by NES715. Approved to DEF STAN 59/97 iss.3 type DF. The boots can be used with spin coupling backshells or where ever the connector offers suitable rear mounting.

Features and benefits

• Low smoke Low emission properties
• Excellent sealing and strain relief
• Dielectric strength: 15MV/m

Note

If boots are used with sealant kit stock no. 239-1516, this kit does not meet the zero halogen properties of type - 100 boots

Standards

DEF STAN 59/97 issue 3 Type DF

//media.rs-online.com/t_line/L279479-01.gif
Specificaties
Kenmerk Waarde
Type Straight Cable Boot
Inside Diameter Primary 30mm
Inside Diameter Secondary 15mm
Adhesive Lined No
Material LFH Polyolefin
Number of Breakouts 1
Colour Black
Minimum Operating Temperature -30°C
Maximum Operating Temperature +105°C
Shrunk Diameter Primary 14.2mm
Shrunk Diameter Secondary 5.9mm
48 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
41 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
11,84
(excl. BTW)
14,33
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 11,84
10 - 24
€ 11,05
25 - 49
€ 10,45
50 - 99
€ 10,06
100 +
€ 9,84
Related Products
Moulded parts that provide durable strain relief, protection ...
Description:
Moulded parts that provide durable strain relief, protection and an environmental seal when used with an adhesive. Available in straight and right angled types, these chemical and abrasion resistant heat shrink boots are made from a tough modified elastomer, and ...
T-shaped moulded parts with 45° or 90° side ...
Description:
T-shaped moulded parts with 45° or 90° side breakouts. Manufactured from heat shrink DR-25 material these moulded parts have good resistance to aggressive chemicals at high temperature. • Provides strain relief, protection and mechanical support• Shrink Ratio 2:1• Flame retardant. ...
The TE Connectivity 15mm inner diameter black cable ...
Description:
The TE Connectivity 15mm inner diameter black cable boot is heat shrinkable moulded part that provides lightweight screening and protection. It is a high-performance and reliable product that offers enhanced EMI performance. It offers screening capability with 70db attenuation up ...
General purpose Y-Shaped heat shrink moulded parts. These ...
Description:
General purpose Y-Shaped heat shrink moulded parts. These heat shrink boots provide strain relief and protection on cable harnesses. • Y-Shape transition• Good resistance to aggressive chemicals at high temperature• Manufactured from fluid resistant elastomer• Available with 2, 3 or ...