TE Connectivity Straight Cable Boot Black, LFH Polyolefin Adhesive Lined, 36mm

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Zero Halogen (Lipped) - 202K1 and 222K1 Series

Designed for use where hazard reduction in the event of fire is crucial. Widely used in marine, transport, offshore and other high specification applications. Other features include low smoke index as defined by NES711, low toxicity index as defined by NES713 and high temperature index as defined by NES715. Approved to DEF STAN 59/97 iss.3 type DF. The boots can be used with spin coupling backshells or where ever the connector offers suitable rear mounting.

Features and benefits

• Low smoke Low emission properties
• Excellent sealing and strain relief
• Dielectric strength: 15MV/m

Note

If boots are used with sealant kit stock no. 239-1516, this kit does not meet the zero halogen properties of type - 100 boots

Standards

DEF STAN 59/97 issue 3 Type DF

Specificaties
Kenmerk Waarde
Type Straight Cable Boot
Inside Diameter Primary 36mm
Inside Diameter Secondary 21mm
Adhesive Lined Yes
Material LFH Polyolefin
Number of Breakouts 1
Colour Black
Minimum Operating Temperature -30°C
Maximum Operating Temperature +105°C
Shrunk Diameter Primary 22.4mm
Shrunk Diameter Secondary 8.4mm
Sorry, we konden onze voorraadniveaus nu niet controleren. Probeer de pagina te vernieuwen.
Prijs Each
26,23
(excl. BTW)
31,74
(incl. BTW)
Aantal stuks
Per stuk
1 - 14
€ 26,23
15 - 49
€ 25,95
50 +
€ 25,72
Verpakkingsopties
Related Products
Developed to meet the increased requirements for safety ...
Description:
Developed to meet the increased requirements for safety and reliability in the automotive field these sealed connectors satisfy all of the parameters defined by automotive/industrial standards covering such areas as vibration, shock, salt water spray, industrial gas, low millivolt drop ...
Heat shrinkable boots providing a watertight seal and ...
Description:
Heat shrinkable boots providing a watertight seal and protecting cables and equipment from corrosion and mechanical abuse, for most mass transit, military and commercial marine applications. Flame retardantAdhesive sealant replaces tapes, epoxies and greaseReliable sealing on cable jackets and on ...
Available in heat-shrink or threaded versions for use ...
Description:
Available in heat-shrink or threaded versions for use with plastic flexible conduit. Can be fitted in place of the seal securing nut on respective plugs and sockets.
A range of connector heatshrink boots and accessories ...
Description:
A range of connector heatshrink boots and accessories for use with the Terrapin range of harsh environment connectors. Offered in straight and right angle versions and a variety of shell sizes. IP68 sealingRobust and tamperproofSuitable for harsh environments.