TE Connectivity End Cap Black, Polyolefin, 12.7mm
- RS-stocknr.:
- 874-1513
- Fabrikantnummer:
- PD-CAP-1/2-0
- Fabrikant:
- TE Connectivity
300 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
400 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
Toegevoegd
Prijs Elk (in een pakket van 100)
€ 0,346
(excl. BTW)
€ 0,419
(incl. BTW)
| Aantal stuks | Per stuk | Per pak* |
| 100 - 1400 | € 0,346 | € 34,60 |
| 1500 - 4900 | € 0,335 | € 33,50 |
| 5000 + | € 0,325 | € 32,50 |
| *prijsindicatie | ||
- RS-stocknr.:
- 874-1513
- Fabrikantnummer:
- PD-CAP-1/2-0
- Fabrikant:
- TE Connectivity
Datasheets
Wetgeving en compliance
N.v.t.
- Land van herkomst:
- CZ
Productomschrijving
PD Heat Shrink Cap
Semirigid, encapsulant-lined heat shrink end caps with a shrink ratio of 3:1. When the dual wall PD Caps are briefly heated, the outer jacket shrinks while the inner wall flows into voids in the crimp, creating an encapsulated and electrically insulated connection.
Features and benefits
• Easy and fast installation
• 3:1 shrink ratio
• Permanent or temporary way to terminate wires
• Rugged protection against abrasion, vibration, and flexing
• 3:1 shrink ratio
• Permanent or temporary way to terminate wires
• Rugged protection against abrasion, vibration, and flexing
PD CAP Kit contents
Note
PD Caps are not intended for use where immersion in fluids is required.
Specificaties
Kenmerk | Waarde |
|---|---|
| Type | End Cap |
| Inside Diameter Primary | 12.7mm |
| Material | Polyolefin |
| Shrink Temperature | +125°C |
| Colour | Black |
| Minimum Operating Temperature | -55°C |
| Maximum Operating Temperature | +110°C |
| Shrunk Diameter Primary | 2.29mm |
| Standards Met | UL E85381 |
| Series | PD Caps |