Legrand Black Polyamide Cable Tie Assemblies

  • RS-stocknr. 521-027
  • Fabrikantnummer 0 319 02
  • Fabrikant Legrand
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: FR
Productomschrijving

Cable tie clip with base

A clip that is chemical and weather-resistant.
For Colson™ installations for cables from 13 → 38 mm diameter or smooth rigid insulating tubes from 16 mm → 32 mm diameter.
Anti-UV protection
Mounted with screw-in pin, metal lug, screw, nail gun.

Standards

EN50146 and IEC 62275

Specificaties
Kenmerk Waarde
Contents Cable Tie, Cable Tie Mount
Colour Black
Material Polyamide
Minimum Operating Temperature -40°C
Maximum Operating Temperature +85°C
Maximum Cable Tie Width 38mm
2 op voorraad - levertijd is 1 werkdag(en).
Prijs 1 Box of 100
68,61
(excl. BTW)
83,02
(incl. BTW)
Box(es)
Per doos
Per stuk*
1 - 14
€ 68,61
€ 0,686
15 - 49
€ 65,17
€ 0,652
50 +
€ 61,74
€ 0,617
*prijsindicatie
Related Products
Two-piece clips to guide and bundle cables or ...
Description:
Two-piece clips to guide and bundle cables or wires on an edgeThe clip is simply pushed on by hand and held securely on the edge by the integrated metal clipThe edge clip can be slid freely on the tieThe clip ...
Suitable for plastic and sheet edges of 1–3 ...
Description:
Suitable for plastic and sheet edges of 1–3 mmThe clip is pushed on and held firmly in place on the edge by the integrated metal clipSerrated on the outside to minimise damage to bundled cablesProcessing tool: MK7, MK 20 RS ...
These cable ties with EdgeClip assemblies are ideal ...
Description:
These cable ties with EdgeClip assemblies are ideal for use where holes are not acceptable or where due to temperature problems, adhesives will fail. These cable tie assemblies are widely used for fixing and bundling cables, pipes and hoses within ...
The FlexTack mount from HellermannTyton provides an innovative ...
Description:
The FlexTack mount from HellermannTyton provides an innovative fixing solution for concave or convex low energy surfaces or if drilling a hole is not possible. These cable tie mounts allow greater design freedom and offer uniform stress distribution along with ...