Mitutoyo 6in Digital Caliper 0.01 mm, Imperial
- RS-stocknr. 432-025
- Fabrikantnummer 500-171-30
- Fabrikant Mitutoyo
Mitutoyo-Absolute
Electronic calipers with an LCD display which will display in either ’metric/imperial (switchable)’ or ’metric only’ reading depending on model.
General Features:
Fully hardened stainless steel beam & jaws with an anti-glare, satin chrome finish
All measuring surfaces are ground and lapped for high accuracy
Capable of measuring: inside, outside, depth and step
Storage Temp: -10°C to +60°C
Operating Temp: 0°C to +40°C
Electronic Features:
ON/OFF - Switches unit on, display indicates distance of jaws from pre-set origin point
ABS - Absolute feature re-sets the ’reference’ point of measurement of the instrument jaws
in./mm - Selects imperial or metric display
Origin - Pre-sets the zero point of the instrument. This point is memorised even if the unit is switched off
Note
Imperial/metric versions have thumbwheel where metric does not.
SPC output versions - A connection port continually transmits data (MITUTOYO FORMAT). 1m/2m leads are available separately, see this section
Supplied with
SR44 Battery
Mitutoyo Digital Precision Caliper
The Mitutoyo 0 to 6in digital precision calliper is a highly accurate measuring instrument. It is enabled with a new age electromagnetic inductive sensor that repels dirt, oil, and water ensuring maximum accuracy. It has a function that starts the absolute-mode measurement without any zero-setting after it is switched on. The INC (incremental) measurement function enables the display value to be set to zero, temporarily, at the current slider position to enable easy incremental-mode measurement. The original position of the calliper can be set, or reset, with the ’origin' switch at any time. It has advanced functions like low battery alarm indication and carbide-tipped jaw that makes it ideal for various applications like measurement of rough-machined workpieces, castings, and grindstones.
Note:
Imperial/metric versions have thumbwheel where metric does not.
SPC output versions -A connection port continually transmits data (MITUTOYO FORMAT). 1m/2m leads are available separately, see this section
Supplied with SR44 Battery
Features and Benefits
• Step-measurement capable
• Battery life of approximately 3.5 years has been achieved under normal use through the adoption of Mitutoyo's absolute scale
• The slider configuration features an ergonomic, thumb-friendly shape
• Range of 0in to 6in
• Resolution of 0.01mm
• Accuracy of ±0.001in
• Button-type silver oxide battery power supply
• High response speed
• Carbide-tipped jaws for outside and inside measurement
• Capable of measuring: inside, outside, depth and step
• All measuring surfaces are ground and lapped for high accuracy
Applications
• Mechanical engineering
• Aerospace industries
• Steel and other metalwork industry
| Kenmerk | Waarde |
|---|---|
| Caliper Type | Digital |
| Capacity | 150mm |
| Imperial or Metric | Both |
| Display Type | Digital |
| Accuracy | ±0.001 in |
| Resolution | 0.01 mm |
