Mitutoyo 150mm Digital Caliper, Metric With UKAS Calibration

  • RS-stocknr. 124-3542
  • Fabrikantnummer 500-161-30
  • Fabrikant Mitutoyo
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: JP
Productomschrijving

Mitutoyo-Absolute

Electronic calipers with an LCD display which will display in either ’metric/imperial (switchable)’ or ’metric only’ reading depending on model.

General Features:

Fully hardened stainless steel beam & jaws with an anti-glare, satin chrome finish

All measuring surfaces are ground and lapped for high accuracy
Capable of measuring: inside, outside, depth and step
Storage Temp: -10°C to +60°C
Operating Temp: 0°C to +40°C

Electronic Features:

ON/OFF - Switches unit on, display indicates distance of jaws from pre-set origin point
ABS - Absolute feature re-sets the ’reference’ point of measurement of the instrument jaws
in./mm - Selects imperial or metric display
Origin - Pre-sets the zero point of the instrument. This point is memorised even if the unit is switched off

Note

Imperial/metric versions have thumbwheel where metric does not.
SPC output versions - A connection port continually transmits data (MITUTOYO FORMAT). 1m/2m leads are available separately, see this section

Supplied with

SR44 Battery

Mitutoyo Digital Precision Caliper

The Mitutoyo 0 to 150mm range digital precision calliper is a highly accurate measuring instrument. It is enabled with a new age electromagnetic inductive sensor that repels dirt, oil, and water ensuring maximum accuracy. It has a function that starts the absolute-mode measurement without any zero-setting after it is switched on. The INC (incremental) measurement function enables the display value to be set to zero, temporarily, at the current slider position to enable easy incremental-mode measurement. The original position of the calliper can be set, or reset, with the ’origin' switch at any time. It has advanced functions like low battery alarm indication and carbide-tipped jaw that makes it ideal for various applications like measurement of rough-machined workpieces, castings, and grindstones.

Features and Benefits

• Step-measurement capable
• Battery life of approximately 3.5 years has been achieved under normal use through the adoption of Mitutoyo's absolute scale
• The slider configuration features an ergonomic, thumb-friendly shape
• Resolution of 0.01mm
• Accuracy of ±0.02mm
• Button-type silver oxide battery power supply
• High response speed
• Font height is 9mm,alleviation of fatigue with the high-contrast LCD

Applications

• Mechanical engineering
• Aerospace industries
• Steel and other metalwork industry

Specificaties
Kenmerk Waarde
Caliper Type Digital
Capacity 150mm
Imperial or Metric Metric
Display Type Digital
Calibrated UKAS
Accuracy ±0.02 mm
3 op voorraad - levertijd is 1 werkdag(en) plus 1 dag extra in verband met gekalibreerd artikel. Gekalibreerde producten kunnen niet worden geretourneerd.
Prijs Each
197,44
(excl. BTW)
238,90
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 197,44
Related Products
500 Series 150 mm DIN 862 Super Digital ...
Description:
500 Series 150 mm DIN 862 Super Digital Caliper. Environmentally friendly model does not require batteriesFlat depth gaugeMin. luminosity for use: 60 luxSupplied in a caseImpact proof housingIP67 Coolant proof.
RS PRO Digital Caliper features an LCD display ...
Description:
RS PRO Digital Caliper features an LCD display and dual scales with both metric and imperial readings of internal and external precision measurements. The adjustable mechanism has a convenient thumbwheel so you can accurately adjust the caliper to measure objects ...
RS Pro Digital Calipers use linear encoders to ...
Description:
RS Pro Digital Calipers use linear encoders to measure internal and external distances. This is then shown on a digital display which is simple to use and easy to read. This handy tool is available with metric and imperial conversions ...
The Kleffmann & Weese 0 to 150mm range ...
Description:
The Kleffmann & Weese 0 to 150mm range precision calliper is a highly accurate measuring instrument. It is made from fully hardened stainless steel construction and has an anti-glare, satin chrome finish. All measuring surfaces are ground and lapped for ...