Microchip Technology MCP25625T-E/ML, CAN Controller 1Mbit/s CAN 2.0B, 28-Pin QFN

  • RS-stocknr. 177-3171
  • Fabrikantnummer MCP25625T-E/ML
  • Fabrikant Microchip
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: US
Productomschrijving

The MCP25625 is a complete, cost-effective and small-footprint CAN solution that can be easily added to a microcontroller with an available SPI interface. The MCP25625 interfaces directly with microcontrollers operating at 2.7V to 5.5V, there are no external level shifters required. In addition, the MCP25625 connects directly to the physical CAN bus, supporting all requirements for CAN high-speed transceivers.

Stand-Alone CAN2.0B Controller with Integrated CAN Transceiver and Serial Peripheral Interface (SPI)
Up to 1 Mb/s Operation
Very Low Standby Current (10 μA, typical).
Up to 10 MHz SPI Clock Speed
Interfaces Directly with Microcontrollers with 2.7V to 5.5V I/O
Available in SSOP-28L and 6x6 QFN-28L
Temperature Ranges:
Extended (E): -40°C to +125°C

Specificaties
Kenmerk Waarde
Maximum Data Rate 1Mbit/s
Number of Transceivers 1
Standard Supported CAN 2.0B
Power Down Mode Sleep, Standby
Maximum Supply Current 10 mA
Mounting Type Surface Mount
Package Type QFN
Pin Count 28
Dimensions 6 x 6 x 0.92mm
Length 6mm
Width 6mm
Height 0.92mm
Maximum Operating Supply Voltage 5.5 V
Maximum Operating Temperature +125 °C
Minimum Operating Supply Voltage 2.7 V
Minimum Operating Temperature -40 °C
1495 op voorraad - levertijd is 2 werkdag(en).
Prijs Each (In a Pack of 5)
2,136
(excl. BTW)
2,585
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 5
€ 2,136
€ 10,68
10 - 20
€ 1,808
€ 9,04
25 - 95
€ 1,75
€ 8,75
100 +
€ 1,578
€ 7,89
*prijsindicatie
Verpakkingsopties
Related Products
The MAX3471EUA+T is a differential transceiver made typically ...
Description:
The MAX3471EUA+T is a differential transceiver made typically for battery powered RS-485/RS-422 systems but other applications include remote power reading & level translators. The MAX3471EUA+T is a half-duplex transceiver with the receiver enabled and the driver disabled. With a supply ...
The Maxim family of dual RS232 line drivers ...
Description:
The Maxim family of dual RS232 line drivers and receivers are intended for all EIA/TIA-232E, V.24 and V.28 communications interface. Maxim’s RS232 dual transmitter/receiver will allow applications such as interface translation, modem, laptop as well as RS232 battery-powered systems due ...
The Maxim family of dual RS232 line drivers ...
Description:
The Maxim family of dual RS232 line drivers and receivers are intended for all EIA/TIA-232E, V.24 and V.28 communications interface. Maxim’s RS232 dual transmitter/receiver will allow applications such as interface translation, modem, laptop as well as RS232 battery-powered systems due ...
The DG9232E, DG9233E, and DG9234E are monolithic CMOS ...
Description:
The DG9232E, DG9233E, and DG9234E are monolithic CMOS switches designed for precision signal switching. The 17  low voltage parts feature low charge injection, leakage, parasitic capacitance, and fast switching. The DG9232E, DG9233E, and DG9234E can switch both analog and ...