onsemi NCV7327D10R2G, LIN Transceiver 20kbps, 8-Pin SOIC
- RS-stocknr.:
- 195-2453
- Fabrikantnummer:
- NCV7327D10R2G
- Fabrikant:
- onsemi
Subtotaal (1 verpakking van 50 eenheden)*
€ 34,20
(excl. BTW)
€ 41,40
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 75,00
Laatste voorraad RS
- Laatste 8.500 stuk(s), klaar voor verzending vanaf een andere locatie
Aantal stuks | Per stuk | Per verpakking* |
|---|---|---|
| 50 + | € 0,684 | € 34,20 |
*prijsindicatie
- RS-stocknr.:
- 195-2453
- Fabrikantnummer:
- NCV7327D10R2G
- Fabrikant:
- onsemi
Specificaties
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | onsemi | |
| Maximum Data Rate | 20kbps | |
| Number of Transceivers | 1 | |
| IC Type | LIN Transceiver IC | |
| Power Down Mode | Standby | |
| Maximum Supply Current | 6.5 mA | |
| Mounting Type | Surface Mount | |
| Package Type | SOIC | |
| Pin Count | 8 | |
| Dimensions | 4.9 x 3.9 x 1.5mm | |
| Length | 4.9mm | |
| Width | 3.9mm | |
| Height | 1.5mm | |
| Maximum Operating Supply Voltage | 18 V | |
| Maximum Operating Temperature | +150 °C | |
| Minimum Operating Supply Voltage | 5 V | |
| Minimum Operating Temperature | -40 °C | |
| Automotive Standard | AEC-Q100 | |
| Alles selecteren | ||
|---|---|---|
Merk onsemi | ||
Maximum Data Rate 20kbps | ||
Number of Transceivers 1 | ||
IC Type LIN Transceiver IC | ||
Power Down Mode Standby | ||
Maximum Supply Current 6.5 mA | ||
Mounting Type Surface Mount | ||
Package Type SOIC | ||
Pin Count 8 | ||
Dimensions 4.9 x 3.9 x 1.5mm | ||
Length 4.9mm | ||
Width 3.9mm | ||
Height 1.5mm | ||
Maximum Operating Supply Voltage 18 V | ||
Maximum Operating Temperature +150 °C | ||
Minimum Operating Supply Voltage 5 V | ||
Minimum Operating Temperature -40 °C | ||
Automotive Standard AEC-Q100 | ||
The NCV7327 is a fully featured local interconnect network (LIN) transceiver designed to interface between a LIN protocol controller and the physical bus. The LIN bus is designed to communicate low rate data from control devices such as door locks, mirrors, car seats, and sunroofs at the lowest possible cost. The bus is designed to eliminate as much wiring as possible and is implemented using a single wire in each node. Each node has a slave MCU−state machine that recognizes and translates the instructions specific to that function. The main attraction of the LIN bus is that all the functions are not time critical and usually relate to passenger comfort.