Microchip Technology MCP2562-H/MF, CAN Transceiver 1Mbit/s 1-Channel, 8-Pin DFN

  • RS-stocknr. 177-1930
  • Fabrikantnummer MCP2562-H/MF
  • Fabrikant Microchip
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: TH
Productomschrijving

The MCP2561/2 is Microchip Technology Inc. second generation high-speed CAN transceiver. It serves as an interface between a CAN protocol controller and the physical two-wire CAN bus. The device family members are: • MCP2561 with SPLIT pin • MCP2562 with VIO pin

Supports 1 Mb/s operation
Implements ISO-11898-5 standard physical layer requirements
Very low standby current (Typ: 5μA)
VIO supply pin (MCP2562) to interface directly to CAN controllers and microcontrollers with 1.8V to 5V I/O
SPLIT output pin (MCP2561) to stabilize common mode in biased split termination schemes
CAN bus pins are disconnected when device is unpowered. An unpowered node or brown-out event will not load the CAN bus
Detection of ground fault, Permanent dominant detection on TXD, Permanent dominant detection on bus
Power-on Reset and voltage brown-out protectionon VDD and VIO pin

Specificaties
Kenmerk Waarde
Maximum Data Rate 1Mbit/s
Number of Transceivers 1
Power Down Mode Normal, Standby
Maximum Supply Current 70 mA
Mounting Type Surface Mount
Package Type DFN
Pin Count 8
Dimensions 3 x 3 x 0.95mm
Length 3mm
Width 3mm
Height 0.95mm
Maximum Operating Supply Voltage 5.5 V
Maximum Operating Temperature +150 °C
Automotive Standard AEC-Q100
Minimum Operating Temperature -40 °C
Minimum Operating Supply Voltage 4.5 V
480 op voorraad - levertijd is 2 werkdag(en).
Prijs Each (In a Pack of 10)
0,776
(excl. BTW)
0,939
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 - 20
€ 0,776
€ 7,76
30 +
€ 0,748
€ 7,48
*prijsindicatie
Verpakkingsopties
Related Products
The Microchip MCP413x, MCP415x, MCP423x and MCP425x range ...
Description:
The Microchip MCP413x, MCP415x, MCP423x and MCP425x range of devices are Digital Potentiometers that feature a SPI interface. On board is volatile RAM memory.7-bit (129 steps) and 8-bit (257 steps) versions are available in various RAB resistance options from 5 ...
The FT81x series of Embedded Video Engines offers ...
Description:
The FT81x series of Embedded Video Engines offers the designer improved performance over the FT80x series with new features, while retaining pin compatibility. The FT81x provides graphics control, audio control and a touch screen interface. The built-in graphics operations allow ...
The i.MX28x is a high-performance ARM9-core 32-bit microcontroller ...
Description:
The i.MX28x is a high-performance ARM9-core 32-bit microcontroller optimized for embedded multimedia applications. It is available in consumer, industrial and automotive grades. The automotive grade parts have the additional benefit of being AEC-Q100 qualified. 454MHz ARM926EJ-S core with 128KB Mask-PROM, ...
The NCS2009 series operational amplifiers provide rail−to−rail input ...
Description:
The NCS2009 series operational amplifiers provide rail−to−rail input and output operation, 350 kHz bandwidth, and are available in single, dual, and quad configurations. Rail−to−rail operation gives designers use of the entire supply voltage range while taking advantage of the 350 ...