Cat6 Patch Cable with Snagless RJ45 Conn

  • RS-stocknr. 186-1993
  • Fabrikantnummer N6PATC50CMBL
  • Fabrikant Startech
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

N6PATC50CMBL Cat6 Cable

The N6PATC50CMBL Cat 6 Patch Cable (0.5m) meets or exceeds all Category 6 cable specifications to ensure reliable Gigabit network connections, and features a durable blue PVC jacket that enables you to color code your network cable runs as needed.
To ensure long-lasting performance, this high quality Cat 6 patch cable features a snagless design that protects the RJ45 connector clips from damage and makes the cable less prone to snagging during installation. The cable also features molded PVC strain relief that prevents the RJ45 connector termination points from bending at sharp angles - reducing the risk of cable damage, which could decrease network performance.
Constructed of only top quality materials, this Cat 6 Patch Cord delivers reliable performance and is backed by our Lifetime Warranty.

100% Copper - a better value
StarTech.com Cat6 cables are manufactured using high-quality copper conductors. "We make no compromises on quality to ensure you receive top value and performance for your network cable investment".

24 AWG Wire
This Cat6 cable is constructed with 24 gauge copper wire, to support a broad range of Ethernet applications such as Power over Ethernet (PoE). Because we use a high quality copper wire, our cables easily sustain the power required for Power over Ethernet applications, whereas the inferior quality offered by copper-coated aluminum cables may be subject to insufficient power delivery, heat buildup, equipment damage and potentially, fire.

50-micron Gold Connectors
This Cat 6 patch cable offers high quality connectors comprised of 50-micron gold, to deliver optimum conductivity while eliminating signal loss due to oxidation or corrosion.

Features & Benefits

• RJ45 connector clip protectors
• Carefully constructed and tested, to keep Near End Crosstalk (NEXT) well within acceptable limits
• Colored hoods for departmental color coding
• Molded strain relief prevents the cable from being bent at sharp angles at the RJ45 connector, to minimize the stress at the plug termination point
• Constructed with top quality components
• High quality 24 AWG copper wire
• ETL Verified
• 50-micron gold connectors ensure optimum conductivity while eliminating signal loss due to oxidation or corrosion
• RJ45 connector clip protectors help keep the plugs from snagging while routing the cable, for easier Cat 6 cable runs
• Backed by StarTech.com lifetime warranty

Applications

• Designed for use with Gigabit networks
• Patches from hub to distribution panel
• Connects workstation to wall outlet

What’s in the package?

• 0.5 m Blue Snagless Cat6 UTP Patch Cable - ETL Verified

FAQs

What is a Cat6 cable used for?
Cat6 or Category 6 cables are typically used for connecting computers to another device, like router, hub or modems and ISP’s to allow the sharing of data across a network or for accessing the internet. Typically, Cat6 cables permit a higher frequency of 250Mhz and can be used over a maximum distance of 55m for 10GBASE-T.

What is the difference between Cat6 and Cat5/5e cables?
Cat ethernet cables have undergone significant development over the years with improved features and performances. The key difference between Cat 6 over the Cat5 & Cat5e is not only the higher speeds but also the reduced crosstalk or commonly known as interference with other cables. Reduced crosstalk is primarily improved with better shielding and twisted cable design. Cat6 can perform up to 250MHz whilst Cat5e can only operate up to 100MHz.

What’s the difference between a cat6 patch lead and a crossover cable?
A cat6 patch lead or cable, also known as a straight through cable, is used for connecting devices of different types, like a computer to a switch or hub.
Ethernet crossover cable on the other hand is used for connecting two types of the same device together e.g. two computers.

Specificaties
Kenmerk Waarde
Length 500mm
Terminated/Unterminated Terminated
Connector Type Male RJ45
Shield Type UTP
Sheath Colour Blue
Outer Sheath Material PVC
20 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
2,60
(excl. BTW)
3,15
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 2,60
Related Products
This Cat5e patch cable delivers reliable network connections, ...
Description:
This Cat5e patch cable delivers reliable network connections, which ensures high-performance capability for your demanding Ethernet applications.Find the length and color you needThis 10-meter black network cable is perfect for use in network conduits and raceways. The cable is intended ...
Providing an effective solution to the problem of ...
Description:
Providing an effective solution to the problem of patch cord congestion in high density 1U active equipment, these slim boot patch cords provide an anti-snag latch protection ideal for patching hubs/switches. Slim boot designSuitable for high density active equipment with ...
These RS PRO patch leads, also known as ...
Description:
These RS PRO patch leads, also known as Ethernet patch cables are manufactured using Category 6 cables, commonly referred to as Cat6 Cable. They are electrical cables often used in office environments to link computers to a network hub, router ...
This 5-meter Cat6 cable meets or exceeds all ...
Description:
This 5-meter Cat6 cable meets or exceeds all Category 6 cable specifications to ensure reliable Gigabit network connections. The cable is shielded to protect your network against electromagnetic interference (EMI/RFI) and system noise, providing the perfect solution for fast and ...