Machinable Glass Ceramic Rod, 300mm x 20mm diameter

  • RS-stocknr. 225-5561
  • Fabrikant MACOR
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: US
Productomschrijving

Macor® Machinable Glass Ceramic

Macor® is a registered trademark of Corning Inc.

For the manufacture of precision components utilising ordinary metalworking tools
No post firing required
Non-wetting, 0% porosity and no deformation
Max no load temperature: 1000°C
Continuous operating temperature: 800°C
Machining tolerances approach 0.013mm (polished smoothness of 0.013mm is achievable)
Can be sealed and joined to itself and to other materials
White in colour

Note

Trial pack (RS Stock number 158-3203) contents: 1 of 10dia x 50mm Rod, 1 of 10x10x25mm Sq Bar, 1 of 25x50x3mm Sheet

Specificaties
Kenmerk Waarde
Material Machinable Glass Ceramic
Form Rod
Length 300mm
Rod Diameter 20mm
Colour White
Thermal Conductivity 1.46W/mK
Density 2.52g/cm³
Hardness A 48 Rockwell
Compressive Strength 35kg/mm²
Fracture Toughness 1.53MPa
Water Absorption 0%
Maximum Operating Temperature +800°C
6 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
14 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
237,06
(excl. BTW)
286,84
(incl. BTW)
Aantal stuks
Per stuk
1 - 2
€ 237,06
3 - 9
€ 220,46
10 - 29
€ 208,61
30 +
€ 189,65
Related Products
Macor® is a registered trademark of Corning Inc. ...
Description:
Macor® is a registered trademark of Corning Inc. For the manufacture of precision components utilising ordinary metalworking toolsNo post firing requiredNon-wetting, 0% porosity and no deformationMax no load temperature: 1000°CContinuous operating temperature: 800°CMachining tolerances approach 0.013mm (polished ...
Macor® is a registered trademark of Corning Inc. ...
Description:
Macor® is a registered trademark of Corning Inc. For the manufacture of precision components utilising ordinary metalworking toolsNo post firing requiredNon-wetting, 0% porosity and no deformationMax no load temperature: 1000°CContinuous operating temperature: 800°CMachining tolerances approach 0.013mm (polished ...
PEEK GF30 is a 30% glass fibre reinforced ...
Description:
PEEK GF30 is a 30% glass fibre reinforced material offering extremely high dimensional stability together with very high thermal-mechanical strength. Suitable for use in highly demanding applications including thermal/electrical insulators, plug parts, high thermal/mechanical loaded parts and support rings etc. ...