Hirose HR30 Series, 2A Female Crimp Contact for use with Plastic Connector, Wire size 30 → 26 AWG

  • RS-stocknr. 827-8920
  • Fabrikantnummer HR30-SC-211
  • Fabrikant Hirose
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: JP
Productomschrijving

Miniature Waterproof Plastic Connectors

The Hirose HR30 lightweight waterproof connectors have an IP67 rating which offers, when mated, a complete protection against water penetration when submerged in 1 metre of water for 30 minutes. All variations are manufactured with glass reinforced thermoplastic compounds and non corrosive components. Connectors with solder termination have solder pot inner diameters as follows:- 3 way (1.1 mm), 6-way (0.8 mm), 12-way (0.6 mm).

Push pull lock mechanism
Small and lightweight
Polarised to protect the contacts from misalignment
Built in cable strain relief
1000 mating/release cycles

Note

Crimp contacts, stock no.s 537-5400 and 537-5416 are for 26 to 30 AWG wire, with an overall diameter of 1 mm max. and must be ordered separately.

Hirose Miniature Waterproof Plastic Connectors - HR30 Series

Specificaties
Kenmerk Waarde
Gender Female
Wire Size 30 → 26 AWG
Termination Method Crimp
Series HR30
For Use With Plastic Connector
Current Rating 2A
Length 11mm
Contact Plating Gold
Contact Material Phosphor Bronze
Minimum Operating Temperature -25°C
Maximum Operating Temperature +85°C
Mounting Type Cable Mount
1050 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
4940 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 10)
0,101
(excl. BTW)
0,122
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 - 40
€ 0,101
€ 1,01
50 - 240
€ 0,096
€ 0,96
250 - 490
€ 0,091
€ 0,91
500 - 990
€ 0,086
€ 0,86
1000 +
€ 0,081
€ 0,81
*prijsindicatie
Related Products
A comprehensive range of crimp contacts suitable for ...
Description:
A comprehensive range of crimp contacts suitable for any connector from the Trim Trio range of connectors, encompassing MSM-MSG -MB rectangular connectors, SMS Qikmate connectors, UTO - UTS - UTL - UTG and UTP - MBG series circular connectors. Featuring ...
High quality stamped pins and sockets made from ...
Description:
High quality stamped pins and sockets made from copper alloy and plated gold over nickel in contact area. Cable insulation range for 26//24 awg contacts is 0.89-1.57mm diameter, and for 22//20 awg contacts 1.17-2.08mm.
Crimp contact for use in Amphenol C 16-3 ...
Description:
Crimp contact for use in Amphenol C 16-3 circular connectors. Cable and chassis mount inserts may be keyed to prevent incorrect connection between typesCan facilitate cable to cable and cable to chassis connectionAll have a pre-mating earth designSupplied with strain ...
Based on DIN 72585, this range of sealed ...
Description:
Based on DIN 72585, this range of sealed connectors has been developed to meet the demand for superior performance. Single piece, formed constructionTin platedWire seals are crimped individually with the contact.