Pi RTC (DS1307)

  • RS-stocknr. 184-5104
  • Fabrikantnummer 103030277
  • Fabrikant Seeed Studio
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

The Pi RTC is based on the clock chip DS1307, it can provide a real-time clock(RTC) for raspberry pi via the I2C interface. Real-time clock of this module counts seconds,minutes, hours, date of the month,month, day of the week, and year with leap-year compensation valid up to 2100. The clock operates in either the 24-hour or 12-hour format with AM/PM indicator. If you want to keep this module timing when the Raspberry Pi is powered off, you need to put a 3-Volt CR1225 lithium cell in the battery-holder.

Support Raspberry Pi 2/ 3 B/B+ Zero
Support seconds,minutes,hours,day of week,month, year
Support 24-hour or 12-hour format with AM/PM indicator
56-byte, battery-backed, non-volatile (NV) RAM for data storage
Programmable square wave output signal
Automatic power-fail detect and switch circuitry
Applications
Applications need Real Time on Raspberry.

Specificaties
Kenmerk Waarde
Clock/Timer Function Real Time Clock (RTC)
Kit Classification Evaluation Board
For Use With Raspberry Pi
Featured Device DS1307
Kit Name Pi RTC (DS1307)
6 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
4,06
(excl. BTW)
4,91
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 4,06
5 - 9
€ 3,64
10 +
€ 3,55
Related Products
MikroElektronika has designed a range of boards to ...
Description:
MikroElektronika has designed a range of boards to add new functions and enhance the development of your applications using the mikroBUS™ pinout standard socket. All in one click!Click™ boards can add a range of sensing, Bluetooth, Wi-Fi, extra memory, UART ...
The NB4N855SMEVB has been developed as a convenience ...
Description:
The NB4N855SMEVB has been developed as a convenience for the customers interested in performing their own device engineering assessment. This evaluation board provides a high bandwidth 50 ohm controlled impedance environment. The NB4N855SMEVB Manual contains appropriate lab setup, assembly instructions ...
The NB3N5573DTGEVB evaluation board is designed to quickly ...
Description:
The NB3N5573DTGEVB evaluation board is designed to quickly evaluate the NB3N5573 device, a high precision, low phase noise clock generator that supports PCI Express and Ethernet requirements. The device takes a 25 MHz fundamental mode parallel resonant crystal and generates ...
The NB7V33M is a differential divide by 4 ...
Description:
The NB7V33M is a differential divide by 4 Clock divider with asynchronous reset. The differential Clock inputs incorporate internal 50-ohm termination resistors and will accept LVPECL, CML and LVDS logic levels. The NB7V33M produces a div 4 output copy of ...