- RS-stocknr.:
- 890-3023
- Fabrikantnummer:
- 269P25.2222.RS
- Fabrikant:
- Huco
2 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
7 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
Toegevoegd
Prijs Per stuk
€ 73,73
(excl. BTW)
€ 89,21
(incl. BTW)
Aantal stuks | Per stuk |
1 - 4 | € 73,73 |
5 - 9 | € 70,78 |
10 + | € 69,31 |
- RS-stocknr.:
- 890-3023
- Fabrikantnummer:
- 269P25.2222.RS
- Fabrikant:
- Huco
Wetgeving en compliance
- Land van herkomst:
- GB
Productomschrijving
6 Plate Adjustable Friction Clutches with Clamp Oldham Coupler, Set Screw & Clamp Fixings
Friction clutches from Huco Vari-Tork designed with adjustable drag or slip torque. Controlled slip takes place between the hub and housing whenever the load exceeds the set torque.
A simple construction, the pressure is brought on to the plates and friction rings by an adjuster acting through a spring and pressure plate. The load can either be connected to the steel inner hub or the aluminium alloy housing.
A simple construction, the pressure is brought on to the plates and friction rings by an adjuster acting through a spring and pressure plate. The load can either be connected to the steel inner hub or the aluminium alloy housing.
Features and Benefits
Compact proportions
4 interface styles
Set screw or clamp connection
Can be used as a torque limiter, tensioning, overrun device
4 interface styles
Set screw or clamp connection
Can be used as a torque limiter, tensioning, overrun device
Product Application Information
As a torque limiter, Vari-Tork interrupts continuity between the power source and load when it reaches a pre-determined level.
As a tensioning device, Vari-Tork typically maintains tension in a filament or tape winding operation by exerting drag on the feed spool.
As an overrun device, Vari-Tork absorbs residual inertia of a motor when the load is braked or reaches a terminal stop.
As a tensioning device, Vari-Tork typically maintains tension in a filament or tape winding operation by exerting drag on the feed spool.
As an overrun device, Vari-Tork absorbs residual inertia of a motor when the load is braked or reaches a terminal stop.
![](https://media.rs-online.com/t_line/L8903023-01.jpg)
Specificaties
Kenmerk | Waarde |
---|---|
Bore | 6mm |
Torque Rating | 132Ncm |
Body Diameter | 25.8mm |