Straight 50Ω RF Adapter UHF Socket to UHF Socket 200MHz

  • RS-stocknr. 112-2066
  • Fabrikantnummer J01042A0637
  • Fabrikant Telegartner
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

UHF connectors

//media.rs-online.com/t_line/LD112206-01.gif
//media.rs-online.com/t_line/LD112206-02.gif

UHF Series is an inexpensive universal plug connector with screw lock. The toothing engages to prevent it from twisting even when exposed to vibration. Its wave impedance has not been adapted and its area of application is limited to lower frequency ranges, up to 200 MHz max. The cable is relieved from strain by screwing it into a thread on the plug body. Contact parts made from CuZn39Pb3 and insulated parts made from PTFE, POM or DAP with nickel-plated housing parts. Supplied with assembly instructions

Specificaties
Kenmerk Waarde
Adapter Type UHF Socket to UHF Socket
Adapter Type A UHF
Adapter Type B UHF
Gender A Female
Gender B Female
Impedance 50Ω
Body Orientation Straight
Operating Frequency 200MHz
Length 30mm
Contact Material Brass Alloy
25 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
32 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
7,24
(excl. BTW)
8,76
(incl. BTW)
Aantal stuks
Per stuk
1 - 14
€ 7,24
15 - 49
€ 6,73
50 - 99
€ 6,33
100 - 249
€ 5,88
250 +
€ 5,41
Related Products
Type N RF coaxial 50 ohm jack to ...
Description:
Type N RF coaxial 50 ohm jack to jack adapters with a nickel plated brass body, PTFE dielectric and gold plated brass contact. Stock number 713-0707 is panel mounting and has a flange with 4 x 3.2mm diameter mounting holes. ...
50 Ohm ZDC/BNC RF coaxial adapter with a ...
Description:
50 Ohm ZDC/BNC RF coaxial adapter with a jack-jack (f-f) configuration and bayonet fitting. This 50 Ohm RF coax BNC jack to BNC jack adapter has a nickel plated zinc body and gold plated male centre contact.
50 Ohm ZDC/BNC RF coaxial T adapter with ...
Description:
50 Ohm ZDC/BNC RF coaxial T adapter with a jack-plug-jack (f-m-f) configuration and bayonet fitting. This 50 Ohm RF coax BNC jack to BNC plug to BNC Jack Tee adapter has a nickel plated zinc body and gold plated male ...
A series of connectors to MIL specifications with ...
Description:
A series of connectors to MIL specifications with high quality materials and PTFE insulation. Non-constant impedance design, suitable for use up to 500V peak and 200MHz, or up to 500MHz with diminished performance. For 50Ω cable use crimp tool stock ...