TE Connectivity 50Ω Straight Through Hole MCX Connector, jack

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

TE Connectivity MCX Series RF Coaxial PCB Jacks and Plug Connectors

A range of MCX series RF coaxial PCB jacks and plugs available with through hole or SMT mounting options. These MCX series microminiature RF coax connectors have a snap-on interface eliminating the need for a threaded connection and are 30% smaller than traditional snap-on SMB connectors and are designed for broadband peformance, DC-6 GHz. Typical applications for these MCX series RF coaxial PCB jack and plug connectors include GPS, automotive and wireless communications. TE Connectivity MCX connectors are mateable with standard MCX connectors and conform to the CECC interface specifications. These MCX RF coax connectors are available with a variety of body platings and dimensions. Please refer to additional data table for details.

TE Connectivity - MCX Range

Lightweight microminiature snap-coupling connectors
Reliable quick connect/disconnect function in dense packaging layouts, offers space saving against SMB equivalents
High frequency performance, ideal in video and broadcast applications
Fully mateable with industry standard MCX family
Straight and right angle plugs for Crimp termination with popular RG174 and RG178 cables
Crimp ferrule with solder contact
Crimp bulkhead jacks also available

MCX Greenpar 50Ω

Specificaties
Kenmerk Waarde
Coaxial Connector Type MCX Connector
Gender Female
Mounting Type Through Hole
Impedance 50Ω
Termination Method Solder
Body Orientation Straight
Operating Frequency 0 to 6GHz
Minimum Operating Temperature -65°C
Body Plating Nickel
Maximum Operating Temperature +165°C
Contact Material Beryllium Copper
Contact Plating Gold
41 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
2,73
(excl. BTW)
3,30
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 2,73
5 +
€ 2,59
Verpakkingsopties
Related Products
UFL series ultra small and lightweight SMT coaxial ...
Description:
UFL series ultra small and lightweight SMT coaxial receptacle connectors with a space saving PCB footprint of 7.7 mm² and weighing just 15.7 mg. These UFL receptacles have a high frequency performance from DC to 6 GHz with a VSWR ...
The AMC (Amphenol Micro Coaxial) connector series is ...
Description:
The AMC (Amphenol Micro Coaxial) connector series is a low profile (2.5 mm of the board) series with an extremely small board footprint (3mm x 3mm). This series is used in applications with 50 Ω impedance requirements, and has a ...
Data Bus discrete triaxial connectors with removable pin ...
Description:
Data Bus discrete triaxial connectors with removable pin or socket conatcts designed for use in MIL-STD-1553B databus applications. These Data Bus discrete connectors have a lightweight, rugged construction with 1000 hour salt spray resistance, 360°C continuous shield coverage, built in ...
The Straight SMT MCX Jack Edge Card for ...
Description:
The Straight SMT MCX Jack Edge Card for PCB 1.6 mm max. is a coaxial connector designed for any wire-to-board application where easy and quick snap-on mating is needed. The RF connectors are available in 50 Ohm and frequencies up ...