Ruland Shaft Collar One Piece Clamp Screw, Bore 40mm, OD 60mm, W 15mm, Stainless Steel

  • RS-stocknr. 174-7130
  • Fabrikantnummer OF-MCL-40-SS
  • Fabrikant Ruland
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: US
Productomschrijving

Ruland OF-MCL-40-SS is a one-piece shaft collar with 40mm bore, 60mm OD, and 15mm width. OF-MCL-40-SS has OD flats and tapped holes for mounting shaft collars to each other or adjacent components. The clamp style design does not mar the shaft, is easy to remove, and is indefinitely adjustable. OF-MCL-40-SS is commonly used for guiding, spacing, stopping, mounting, and component alignment. Equipment manufacturers benefit from the tightly controlled face to bore perpendicularity (TIR of ≤ .05mm). Perpendicularity is critical for alignment when the shaft collar is used as a load bearing face, mechanical stop, or for mounting components such as gears or bearings. Proprietary processes have been developed by Ruland to maintain superior fit, finish, and holding power.

Specificaties
Kenmerk Waarde
Single/Double Wide Single
One/Two Piece One Piece
Fastening Clamp Screw
Shaft Diameter 40mm
Threaded Bore Size M6 x 18
Outside Diameter 60mm
Width 15mm
Material Stainless Steel
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 08-01-2021, met een levertijd van 2 à 3 werkdagen.
Prijs Each
73,35
(excl. BTW)
88,75
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 73,35
5 - 9
€ 71,21
10 +
€ 68,98
Related Products
RS Pro metric bore shaft collars in stainless ...
Description:
RS Pro metric bore shaft collars in stainless steel 304, supplied with stainless steel grub screw to lock the collar in-place once it has been installed. These collars are ideal for keeping bearings on shafts and can be used for ...
Ruland ENSP20-10MM-A is a two-piece shaft collar with ...
Description:
Ruland ENSP20-10MM-A is a two-piece shaft collar with a 10mm bore, 20mm OD, and 5.5mm width. The thin line design reduces weight and allows for use in confined spaces. It has the clamp style benefits of not marring the shaft, ...
The Ruland two-piece shaft collar has dimensions of ...
Description:
The Ruland two-piece shaft collar has dimensions of 10mm bore, 24mm OD and 9mm width. It is made from 303 stainless steel with a bright finish. Equipment manufacturers benefit from the tightly controlled face to bore perpendicularity (TIR of ≤ ...
Ruland OF-MSP-30-F is a two-piece shaft collar with ...
Description:
Ruland OF-MSP-30-F is a two-piece shaft collar with 30mm bore, 54mm OD, and 15mm width. OF-MSP-30-F has OD flats and tapped holes for mounting shaft collars to each other or adjacent components. The clamp style design does not mar the ...