3M, Grey Paste in Cartridge (295 ml), operating temperature -40 → +100 °C

  • RS-stocknr. 146-3185
  • Fabrikantnummer 3M 760 grey 295ml
  • Fabrikant 3M
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: FR
Productomschrijving

3M™ Hybrid Adhesive Sealant 760 is a single component, high strength, elastomeric sealant. This hybrid technology is paintable when wet and will not degrade when exposed to UV.

Excellent adhesion
Paintable when wet
Above/below water line use
Low VOC
30 Minute skin time

Specificaties
Kenmerk Waarde
Package Size 295 ml
Product Form Paste
Package Type Cartridge
Colour Grey
Cure Time 24 (>3.5 mm) h
Minimum Operating Temperature -40°C
Maximum Operating Temperature +100°C
Specific Gravity 1.61
Odour Slight
Operating Temperature Range -40 → +100 °C
19 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
57 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
12,78
(excl. BTW)
15,46
(incl. BTW)
Aantal stuks
Per stuk
1 - 14
€ 12,78
15 - 39
€ 12,27
40 +
€ 12,01
Related Products
Water-based spatter agent which gives exceptional results without ...
Description:
Water-based spatter agent which gives exceptional results without the use of harmful solvents, silicones or mineral oils. Odourless, non-flammable and safe in useFine spray pattern ensures total control and economical coveragePrevents spatter adhesion on welding equipment, work pieces,surfaces, jigs and ...
Alternative to pastes, hemp and PTFE tapeSeals domestic ...
Description:
Alternative to pastes, hemp and PTFE tapeSeals domestic and industrial pipe threadsSuitable for use on portable water systems up to 82°CCertified to ANSI/NSF standard 61Steam compatibility 130°C @ 25psiWRC listed and meets BS6920Corgi approved for use with gas fittingsAvailable in ...
A white thixotropic liquid which sets hard to ...
Description:
A white thixotropic liquid which sets hard to form a pressure tight sealResistant to oil and unaffected by vibrationUse to seal threaded and face joints that are subjected to mineral, fuel and vegetable oils, white spirit and paraffinCan be used ...
For flexible plastic and plastic to metal fittingsLow ...
Description:
For flexible plastic and plastic to metal fittingsLow strengthLow pressure instant seal; 0.5 bar on 1 inch fittingsWater Research Council approved (hot and cold water)Cures within 12 hoursSealing capacity up to 3 bar in water at 90°C.