FTDI Chip USB to RS485 Adapter Board - USB-COM485-Plus1

  • RS-stocknr. 687-7746
  • Fabrikantnummer USB-COM485-Plus1
  • Fabrikant FTDI Chip
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

USB-COM-PLUS Modules

The USB-COM-PLUS modules provide a simple method of adapting legacy serial devices with RS-232, RS-422 or RS-485 interfaces to modern USB ports.

Versions Available:

(687-7730) USB-COM232-Plus1 - USB to RS232 Adapter
(687-7749) USB-COM232-Plus2 - USB to Dual RS232 Adapter
(687-7742) USB-COM232-Plus4 - USB to Quad RS-232 Adapter
(687-7752) USB-COM422-Plus1 - USB to RS422 Adapter
(687-7761) USB-COM422-Plus2 - USB to Dual RS422 Adapter
(687-7764) USB-COM422-Plus4 - USB to Quad RS422 Adapter
(687-7746) USB-COM485-Plus1 - USB to RS485 Adapter
(687-7755) USB-COM485-Plus2 - USB to Dual RS485 Adapter
(687-7758) USB-COM485-Plus4 - USB to Quad RS-485 Adapter

The FTDI Chip USB-COM485-Plus1 is a USB to RS485 adapter board. It provides a straight-forward way to convert older devices with as RS485 interface to more up-to-date USB ports. The USB-COM485-Plus1 features RS485 level shifters and the FT232R USB-Serial bridge IC which enables the conversion.

There are 3 LEDs on the USB-COM485-Plus1. A yellow LED indicates when the board is configured and ready. A green LED represents TxD activity when the data is transmitted to the RS485. Finally, there is a red LED which is for the same but with RxD activity.

What connectors are on-board?
1 x 12Mbps USB type B 2.0 male connector
1 x DE-9P male connector
Note: it works with USB 1.1 and 2.0 host and hub ports

What is the maximum data rate?
The maximum RS485 level data rate is 3Mbps.

Specificaties
Kenmerk Waarde
Kit Classification Development Kit
16 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
95 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
24,11
(excl. BTW)
29,17
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 24,11
5 - 9
€ 22,92
10 - 19
€ 21,78
20 - 49
€ 20,69
50 +
€ 19,80
Related Products
The TTL-234X-5V-WE and TTL-234X-3V3-WE cables are both un-terminated, ...
Description:
The TTL-234X-5V-WE and TTL-234X-3V3-WE cables are both un-terminated, they are bare and tinned wires. The difference between the two cables is that the TTL-234X-5V-WE operates at +5V levels (signals and power supply) and the TTL-234X-3V3-WE operates at +3.3V levels (signals ...
The TTL-234X-3V3-2mm cable is terminated by an 8 ...
Description:
The TTL-234X-3V3-2mm cable is terminated by an 8 way, 2mm pitch, Single-In-Line (SIL) keyed connector. The TTL-234X-3V3-2mm operates at +3.3V levels (signals only, VCC=+5V). These cables are primarily intended for interfacing the FTDI VDRIVE2 and VMUSIC2 modules. Note that when ...
The TTL-234X-5V-AJ and TTL-234X-3V3-AJ cables are both terminated ...
Description:
The TTL-234X-5V-AJ and TTL-234X-3V3-AJ cables are both terminated by a standard 3.5mm Audio Jack (AJ) connector. The difference between the two cables is that the TTL-234X-5V-AJ operates at +5V levels and the TTL-234X-3V3-AJ operates at +3.3V levels. On these cables ...
The FTDI Chip USB Hi-Speed development board is ...
Description:
The FTDI Chip USB Hi-Speed development board is a USB-serial/FIFO mini-module in the FTDI product range, which utilizes the FT4232H USB hi-speed 4-port bridge chip to handle all the USB signalling and protocols. It is ideal for development purposes to ...