Parallax Inc 32400, RF Transceiver Adapter Board XBee USB for XBee Modules

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: US
Productomschrijving

Parallax Inc RF Transceiver Adapter Board

The Parallax Inc RF Transceiver Adapter Board comes in a partially assembled kit form and provides a cost-effective solution to interfacing a PC or microcontroller to any XBee or XBee Pro module. The PC connection can be used to configure the XBee Module through Digi's X-CTU software. This adapter board can provide an easy interface to the XBee or XBee Pro modules by converting the 2mm pin spacing to breadboard-friendly 0.100” spacing. The adapter board also provides a way to connect pluggable wires or solder connections and also provides mounting holes.

Features and Benefits

4 status indicator LEDs for Power, RSSI, Associate and mode (sleep/ON)
Communication is between serial pass through and XBee module
Converts XBee 2mm pin spacing to 0.100” pin spacing
Includes mounting holes
Operating temperature ranges between -40°C and +70°C
Partially assembled kit form for flexible configuration
Pin-out compatible with our other XBee Adapter boards
Provides an easy interface for configuring an XBee Module via a PC
Provides easy pluggable wire or solder connections

Certifications

ANSI/ESD S20.20:2014
BS EN 61340-5-1:2007

Specificaties
Kenmerk Waarde
RF Technology RF Transceiver
Kit Classification Adapter Board
For Use With XBee Modules
Kit Name XBee USB
17 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
49 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
24,42
(excl. BTW)
29,55
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 24,42
5 - 9
€ 23,79
10 +
€ 23,20
Related Products
The STMicroelectronics development discovery kit is an 868MHz ...
Description:
The STMicroelectronics development discovery kit is an 868MHz for Arduino, internet of things. The IoT node allows users to develop applications with a direct connection to cloud servers. This kit enables a wide diversity of applications by exploiting low power ...
The STEVAL-FKI915V1 evaluation board is based on the ...
Description:
The STEVAL-FKI915V1 evaluation board is based on the S2-LP sub-1GHz ultra-low power low data-rate transceiver suitable for ISM bands and Wireless M-Bus.The NUCLEO-L152RE main board with an STM32L low power MCU controls the S2-LP and integrates the ST-LINK/V2-1 debugger and ...
The SigFox click is a device which carries ...
Description:
The SigFox click is a device which carries the SN10-11, a fully integrated module by InnoComm, allowing connection to a low power wide area network (LPWAN) that enables communication utilizing the Industrial, Scientific, and Medical (ISM) radio frequency band. The ...
The BBC micro:bit is a credit card sized ...
Description:
The BBC micro:bit is a credit card sized microcontroller development system, with a very simple and user-friendly visual programming interface, designed to introduce the kids to the world of embedded electronics. The micro:bit project is managed by the micro:bit Educational ...