Eaton Contactor Mounting Enclosure for use with DIL1AM Series, DIL1M Series

  • RS-stocknr. 235-3227
  • Fabrikantnummer 78626736 & CI23E-150+L1-CI23
  • Fabrikant Eaton
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: DE
Productomschrijving

Insulated Surface Mount Enclosures

High impact polycarbonate enclosures
Two part design with removable cover
Ingress protection of IP65
Pre-drilled mounting plates for ’DIL M’ contactors, auxiliaries and overload relays
PG16 knockouts top, bottom and both sides
Ambient temperature -40°C to +80°C

//media.rs-online.com/t_line/LD235316-01.gif
//media.rs-online.com/t_line/LD235316-02.gif
//media.rs-online.com/t_line/LD235316-03.gif
Specificaties
Kenmerk Waarde
Accessory Type Mounting Enclosure
For Use With DIL1AM Series, DIL1M Series
1 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
100,92
(excl. BTW)
122,11
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 100,92
Related Products
Easy, fast and fault free wiring of reversing ...
Description:
Easy, fast and fault free wiring of reversing combinationsPower and control connections for electrical interlocking.
Can be screwed to a backplate or mounted ...
Description:
Can be screwed to a backplate or mounted on top hat DIN railConnection to the coil terminals is made by flying leads approx 150mm long.
Highly conductive auxiliary contacts with four contact pointsQuick ...
Description:
Highly conductive auxiliary contacts with four contact pointsQuick connect - snap on accessory mountingDistinct contact status indicationUp to four auxiliary contacts can be mountedMechanical interlock only 5mm deepPositive (force) guided contacts (mechanically-linked per IEC)three-pole contactors, 9 to 110A IEC ...
A range of accessories that can be used ...
Description:
A range of accessories that can be used with the TeSys contactors and overload relays. • Terminal Blocks can be screw mounted or clipped onto DIN rail.