Onlangs gezocht

    Sensata / Crydom Solid State Contactor, 3NO

    Sensata / Crydom
    RS-stocknr.:
    822-9347
    Fabrikantnummer:
    DRC3P48B400R2
    Fabrikant:
    Sensata / Crydom
    Bekijk alle Contactors
    1 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
    36 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
    Add to Basket
    Aantal stuks

    Toegevoegd

    Prijs Each

    € 84,31

    (excl. BTW)

    € 102,02

    (incl. BTW)

    Aantal stuksPer stuk
    1 - 4€ 84,31
    5 +€ 80,02
    RS-stocknr.:
    822-9347
    Fabrikantnummer:
    DRC3P48B400R2
    Fabrikant:
    Sensata / Crydom

    Wetgeving en compliance

    Land van herkomst:
    MX

    Productomschrijving

    Crydom DRC Series Solid State Contactors


    Crydom DRC Series Solid State Contactors are intended for frequently switching on and off three phase loads up to 5 HP. They are available in both contactor versions DRC3P and reversing contactor versions DRC3R.
    DRC3P are available in either instantaneous turn-on (for Motor Control) or zero voltage turn-on (for Resistive Loads).
    DRC3R include an interlock control that allows only off, forward and reverse operation in a safe mode: they switch
    instantaneously upon application of the control voltage and when an instantaneous change of direction is commanded they will delay the direction change by 100m/sec in order to prevent simultaneous forward and reverse operations.
    This unique solid state contactor can start/stop a 3 Phase AC Motor at a maximum switching frequency of 9000 cycles/hour.

    7.6 Amp Motor Controller rated Solid State Contactor
    Load voltage range up to 530 VAC
    Fits standard 35 mm DIN rail
    LED input status indicator
    AC or DC control
    Zero crossing (resistive loads) or instantaneous turn-on (inductive loads) output
    Built in Overvoltage Protection
    Ultra-efficient thermal management design (Patented)
    C-UL-US Listed, IEC Rated, CE & RoHS Compliant, Horsepower Rated
    Embedded auxiliary contacts
    DRC3R has reversing control (DRC3R includes On/Off and Forward/Reverse control in a compact 45 mm package)
    Output terminals designed for an easy connection to multiple motor connections in parallel for a total up to 5 HP @ 480 Vac
    Very low input control current
    UL Listed, IEC60947-2 standard package

    Note

    The reversing option has dual control inputs.


    Solid State Contactors

    Specificaties

    KenmerkWaarde
    Normal State Configuration3NO
    Terminal TypeScrew
    Length45.31mm
    Width86.71mm
    Depth96.02mm
    Load Voltage48 V ac → 510V ac
    Minimum Operating Temperature-30°C
    Mounting StyleDIN Rail Mount
    Control Voltage90 V ac → 140 V ac
    Pole and Throw Configuration3P
    Load Current7.6A
    Input Current7.5 mA → 13mA
    Maximum Operating Temperature+80°C
    1 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
    36 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
    Add to Basket
    Aantal stuks

    Toegevoegd

    Prijs Each

    € 84,31

    (excl. BTW)

    € 102,02

    (incl. BTW)

    Aantal stuksPer stuk
    1 - 4€ 84,31
    5 +€ 80,02