Siemens 7 Digit, Mechanical, Digital Counter, 60Hz, 230 V ac

  • RS-stocknr. 123-9495
  • Fabrikantnummer 7KT5807
  • Fabrikant Siemens
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

Sentron Series Mechanical Counters

Sentron series mechanical counters are used for accurately monitoring production and service times, which enables the exact planning and monitoring of production sequences. The accuracy of the counters also enables them to monitor maintenance cycles and warranty times.
The mechanical counters can be used in various application fields such as building management systems.

Features and Benefits

• DIN Rail mounting
• Compact in size
• Analogue operating function
• Up to 7 characters displayed
• IP20 protection

Siemens

Specificaties
Kenmerk Waarde
Supply Voltage 230 V ac
Count Mode Hours
Display Type Mechanical
Reset Method No Reset
Number of Digits 7
Mounting Type DIN Rail
Count Direction Up
Maximum Count Frequency 60Hz
Approvals CE Certified, EAC Approval, UL
Meter Type Mechanical
Series SENTRON
Function Counter
3 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
40,14
(excl. BTW)
48,57
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 40,14
5 - 9
€ 38,13
10 +
€ 36,13
Related Products
6-digit electro-mechanical totalising counters.Counting speed for pulse / ...
Description:
6-digit electro-mechanical totalising counters.Counting speed for pulse / pause ratio = 1:- 20 pulses / sec. in Vdc minimum duration 25 ms / max. unlimited- 10 pulses / sec. in Vac minimum duration 50 ms/max. unlimited.Supplied with plug-in solder clips.Screw ...
The Baumer NE210 series digital counter is a ...
Description:
The Baumer NE210 series digital counter is a single preset, programmable and panel mounted device. This counter has a logic input and relay output. It has a 5-digit LED display and the scaling factor ranges from 0.001 and 99.999. Supply ...
Counts down pulses from a pre-set value and ...
Description:
Counts down pulses from a pre-set value and triggers a changeover contact on reaching zeroContacts return to original position when counter is reset to zeroElectrical connection via supplied plug in clipsOffers IP40 protection with cover (sold seperately)SPDT contact rated to ...
All units are non-resettable and are continuously rated,Counters ...
Description:
All units are non-resettable and are continuously rated,Counters may be damaged if connected to inductive loads where high voltage transients may be present. Should this be unavoidable, use a suitable suppression circuit (refer to the Capacitors section) connected across the ...