Hengstler 6 Digit, LCD, Digital Counter, 5kHz, 12 24 V dc

  • RS-stocknr. 200-1027
  • Fabrikantnummer 0 732 012
  • Fabrikant Hengstler
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

Dual Preset - Counter/tachometer/timer

Multifunction units housed in a panel mounting case (DIN 43700)
Prescaler option - multiplier programmable from 0.001 to 9.999 (counter and tachometer modes)
The unit may be set in any of three modes: Counter Mode; Tachometer Mode; Time Meter Mode
Counter mode: can be programmed for quadrature, differential, count/direction
Tachometer mode: incoming pulses are counter per gate time, which can be pre-selected. Over speed or under speed can also be indicated
Time meter mode: programmable time ranges and decimal point
45 x 45mm panel cutout

Hengstler Digital Counter

The Hengstler TICO 732 series digital counter is a dual preset and multifunctional panel mount device that includes a timer, counter and tachometer. This counter has a voltage input and relay, transistor output. It also has a 6-digit LCD display. It has a voltage rating ranges between 12VDC and 24VDC. The user can set the unit in counter mode, tachometer mode, and time meter mode. The counter mode and time meter mode can be programmed for quadrature, differential, and count/direction. Whereas in the case of tachometer mode, incoming pulses are counter per gate time that can be pre-selected. The user can also indicate over-speed or under-speed and time meter mode that are programmable time ranges and decimal points. This counter has a maximum count frequency of 5KHz.

Features and Benefits

Keypad locking function Prescaler option - Multiplier programmable from 0.001 to 9.999 Plug-in screw terminal connection Front dimensions is 48mm x 48mm PNP outputs and relay changeover contact Operating temperature ranges between 0°C and 50°C

Applications

Industrial counting applications Control and monitoring systems Manufacturing assembly line

Certifications

IP65 rated

Hengstler Panel Mounting 48 x 48

Range of resettable counters with data retention rated at greater then 10 years. Prescaler options and Multiplier scaling outputs for correctly displaying engineering units. Units have a maximum count frequency of either 30Hz or 5kHz depending on setting. Inputs are either NPN/PNP signal or contact closure.

Specificaties
Kenmerk Waarde
Supply Voltage 12 24 V dc
Count Mode Hours
Display Type LCD
Input Type Voltage
Connection Type Screw
Reset Method Automatic, Manual
Number of Digits 6
Mounting Type Panel Mount
Output / Interface Relay, Transistor
Digit Height 9 mm
Maximum Count Frequency 5kHz
Display Range -99999 999999
Series TICO 732
Maximum Operating Temperature +50°C
Measurement Range -99999 999999
Minimum Operating Temperature 0°C
8 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
174,00
(excl. BTW)
210,54
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 174,00
Related Products
5 counting functions (multi-functional)Freely definable scaling factorTwo-colour display ...
Description:
5 counting functions (multi-functional)Freely definable scaling factorTwo-colour display of actual and set value (red & orange)Backlit LCD displayEasy preset using rocker switches.
The Baumer NE212 series digital counter is a ...
Description:
The Baumer NE212 series digital counter is a two preset, programmable and panel mounted device. This counter has a logic input and relay output. It also has an 8-digit LED display and the scaling factor ranges from 0.0001 and 9999.99. ...
Units display rate per minute of pulses receivedResettable7mm ...
Description:
Units display rate per minute of pulses receivedResettable7mm digit height0 to +50°C operating temperature.
DIN 48 x 48 preset counters, IP66 front ...
Description:
DIN 48 x 48 preset counters, IP66 front face with dual-colour backlit LCD display 2 x 6 digits.Reset using the button on the front panel, or by electric signal.Operating mode configuration and module setting using DIP switches on the side ...