Hengstler 6 Digit, LCD, Digital Counter, 60kHz, 230 V ac

  • RS-stocknr. 704-3142
  • Fabrikantnummer 0 772 131
  • Fabrikant Hengstler
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

Multifunctional Counter - tico 772

Universally applicable as tachometer, timer, shift-counter and batch-counter
Simplified handling
Separate preset adjustment (signal 1, trail preset, range or limit value)
Versatile and easy to program, 4 keys to directly address presets, prescaler and seperate totalizer
Clearly readable display with large digits
Display and preset range: -999 999 to +999 999
Alarm signal: display flashes when preset 0, 1 or 2 are active
Input frequency up to 60 kHz
Relay outputs: 250Vac / 30Vdc / 5A
Easy installation due to pluggable terminals
3 Presets
IP65 protection (front panel)

Typical applications:

Time controlling
Position indication
Batch counting
Cutting to length
Rotation speed controlling

Note

The highest count frequency of 60 kHz can only be reached at a special calibration and parameter, this is otherwise quoted at 30 kHz

Hengstler Counter

The Hengstler TICO 772 series digital counter is a three preset multifunctional panel mount counter that includes a tachometer, timer, shift counter and batch counter. It has a 6-digit LCD display and display and preset range of -999,999 to +999,999. This counter has voltage input and relay output. It has a voltage rating of 230VAC. It is easy to program, 4 keys to directly address presets, prescaler and separate totalizer. This counter has a maximum count frequency of 60KHz.

Note:
The highest count frequency of 60KHz can only be reached at a special calibration and parameter, this is otherwise quoted at 30KHz.

Features and Benefits


Easy to operate
• Maximum count frequency is 60KHz
• Four different backlight colours
• Intensity of backlighting can now be adjusted
• Large, clearly readable
• Front dimensions is 48mm x 48mm
• Display and preset ranges between -999999 to 999999
• Easy installation via plug-in terminals
• Relay outputs
• Alarm signal displays flashes when preset 0, 1 or 2 are active
• Operating temperature ranges between 0°C and 50°C

Applications


Time controlling
• Position indication
• Batch counting
• Cutting to length
• Rotation speed controlling

Certifications


IP65 rated
• EN 61 010-1/IEC 61010-1
• UL approved
• CSA certified

Hengstler Panel Mounting 48 x 48

Range of resettable counters with data retention rated at greater then 10 years. Prescaler options and Multiplier scaling outputs for correctly displaying engineering units. Units have a maximum count frequency of either 30Hz or 5kHz depending on setting. Inputs are either NPN/PNP signal or contact closure.

Specificaties
Kenmerk Waarde
Supply Voltage 230 V ac
Count Mode Minutes, Seconds
Display Type LCD
Input Type Voltage
Connection Type Plug, Screw
Reset Method Automatic, Manual
Number of Digits 6
Mounting Type Panel Mount
Output / Interface Relay
Digit Height 9.3 mm
Maximum Count Frequency 60kHz
Display Range 0.0001 → 99 9999
Minimum Operating Temperature 0°C
Weight 200g
Series TICO 772
Maximum Operating Temperature +50°C
Measurement Range 0.0001 → 99 9999
17 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
3 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
139,23
(excl. BTW)
168,47
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 139,23
Related Products
All units are non-resettable and are continuously rated,Counters ...
Description:
All units are non-resettable and are continuously rated,Counters may be damaged if connected to inductive loads where high voltage transients may be present. Should this be unavoidable, use a suitable suppression circuit (refer to the Capacitors section) connected across the ...
Counts down pulses from a pre-set value and ...
Description:
Counts down pulses from a pre-set value and triggers a changeover contact on reaching zeroContacts return to original position when counter is reset to zeroElectrical connection via supplied plug in clipsOffers IP40 protection with cover (sold seperately)SPDT contact rated to ...
Range of resettable counters with data retention rated ...
Description:
Range of resettable counters with data retention rated at greater then 10 years. Prescaler options and Multiplier scaling outputs for correctly displaying engineering units. Units have a maximum count frequency of either 30Hz or 5kHz depending on setting. Inputs are ...
Counter and preselection chronometerMaximum input frequency of 5 ...
Description:
Counter and preselection chronometerMaximum input frequency of 5 KHzSimple parameter setting and configuration using text menusEasy modification of presetsMultiplication factor3 A changeover relayBacklit LCD display (green): 6 digits with a digit height of 9 mmIncorporates an IP65 rated sealed panelOption ...