Omron 4 Digit, LCD, Digital Counter, 10kHz, 24 V dc, 12 → 24 V ac

  • RS-stocknr. 827-6722
  • Fabrikantnummer H7CXA114D1NDC1224AC24
  • Fabrikant Omron
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

H7CN Digital Counter

The H7CN digital counters are a single pre-set counter with a four digit LED display. Various models are available and options such as up, down and reversible counting. They can be operated on a wide range of ac or dc voltages. The count speed of up to 5K counts per second make them extremely versatile and suitable for many possible applications. The units are a standard 48x48mm DIN size but panel mounting adaptors, sockets and accessories are available separately.

Single pre-set counter
Panel, track or surface mount
Sustained output until reset
Supply Voltage AC: 100 to 240 Vac
Supply Voltage DC: 12 to 48 Vdc
Operating temperature range: -10 to +55 °C

Standards

UL / CSA

Specificaties
Kenmerk Waarde
Supply Voltage 12 → 24 V ac, 24 V dc
Count Mode Seconds
Display Type LCD
Input Type No Voltage, Voltage
Connection Type 11 Pin Socket
Reset Method Automatic, External, Manual
Number of Digits 4
Mounting Type Flush Mount, Surface Mount
Output / Interface SPDT Contact
Count Direction Bi-Directional
Digit Height 12 mm
Backlighting Yes
Maximum Count Frequency 10kHz
Display Range -999 → 9999
Measurement Range -999 → 9999
Minimum Operating Temperature -10°C
Series H7CX
Weight 130g
Maximum Operating Temperature +55°C
3 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
267,60
(excl. BTW)
323,80
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 267,60
Related Products
Miniature flush mount adding counter5 digits, 4.2mm high500 ...
Description:
Miniature flush mount adding counter5 digits, 4.2mm high500 strokes per minuteRight hand strokeNon-resettableSwitching distance: 46° to 49°Dimensions: H24 x W32 x D22.5mm.
The Hengstler 886 series digital counter is an ...
Description:
The Hengstler 886 series digital counter is an 8-digit, panel mount without reset totalising device. This counter has a voltage input device that has a supply voltage rating of 24VDC. The counter requires a rear connection via shrouded push-on terminals ...
All units are non-resettable and are continuously rated,Counters ...
Description:
All units are non-resettable and are continuously rated,Counters may be damaged if connected to inductive loads where high voltage transients may be present. Should this be unavoidable, use a suitable suppression circuit (refer to the Capacitors section) connected across the ...
Range of resettable counters with data retention rated ...
Description:
Range of resettable counters with data retention rated at greater then 10 years. Prescaler options and Multiplier scaling outputs for correctly displaying engineering units. Units have a maximum count frequency of either 30Hz or 5kHz depending on setting. Inputs are ...