Address Configuration Badge for use with Radio Frequency Identification System

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: FR
Productomschrijving

Telemecanique Sensors OsiSense XG

RFID - Radio-frequency Identification - can replace traditional bar-coding and electro-magnet tags as a method of product tracking. The OsiSense XG system operates at 13.65Mhz, and uses tag readers that are compatible with almost all tags conforming to ISO 18000-3, ISO 15693, and ISO 14443. This makes it ideal for a wide range of applications that involve tracking the movement of people or products.

Features and Benefits

Tag readers feature integral antennas
Robust IP65 sealed tag readers
Sensing distance up to 100mm
Read/write compatibility with the majority of 13.56 MHz tags on the market
Unlimited read cycles
2.5 Million write cycles typical life
Industry standard M12 connectors for cabling

Note

Maximum reading distance is dependant on tag type selected.

Approvals

UL, CE, EN 301489-1, EN 301489-3

Telemecanique Ositrack

Specificaties
Kenmerk Waarde
Accessory Type Badge
For Use With Radio Frequency Identification System
1 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
16,73
(excl. BTW)
20,24
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 16,73
Related Products
All CBEs have blade terminals and have an ...
Description:
All CBEs have blade terminals and have an insulation resistance greater than 100MΩ (MegaOhms). 1-pole magnetic hydraulic CBE with trip free snap action mechanism with toggle actuation.Industry standard dimensions with medium delay for most applications.Typically used on control equipment, communication ...
PCB, single hole mountingSub-miniature, double insulatedTrip free mechanismSlow ...
Description:
PCB, single hole mountingSub-miniature, double insulatedTrip free mechanismSlow response time (typically 30 seconds at twice nominal current rating) ideal for inductive/reactive loadsTypical life 5000 operations (0.5 to 3A)/1000 operations (4 and 5A) at twice nominal current ratingMainly for motors, transformers ...
Fill level monitoring by means of guided microwavesUpdated ...
Description:
Fill level monitoring by means of guided microwavesUpdated display of the current fill levelProgrammable hysteresis and window functionSimple operation via the user menuThe length of the sensor probe can be shortened as desiredAvailable probes 228 mm (RS order no. 488-047) ...
3/8 inch or M12 (mm) moulded thread-neck single-hole ...
Description:
3/8 inch or M12 (mm) moulded thread-neck single-hole panel mounting6.3-0.8 mm blade terminalsSmall physical sizeTease free, Trip free mechanism for long lifePush to release/push to resetOn/off status indicationOverload and short circuit protectionTypical life 5000 operation at twice nominal current ratingMainly ...